Camden CX-EMF-2ABM – Multi-function relay – ABM metal cabinet, 2 control switches

$75.00

Multi-function relay – ABM metal cabinet, 2 control switches

SKU: CX-EMF-2ABM

Category: Relays

Brands: Camden

Description
Reviews (0)

Description

Series: CX-EMF-2

Type: Multi-function Relay

Multi-function relay – ABM metal cabinet, 2 control switches

Brand: Camden

Manufacturer Part Number: CX-EMF-2ABM

Source: Camden Controls product page

Reviews

There are no reviews yet.

Be the first to review “Camden CX-EMF-2ABM – Multi-function relay – ABM metal cabinet, 2 control switches”

Camden's EMF-2 (EMF-2m or EMF-2ABM) is a microprocessor controlled multi-function relay. This all-in-one design replaces our previous models EMF-1, EMF-1m or EMF-1ABM. The EMF-2 is designed for specialized applications such as ABM vestibules, one or two- door restrooms in shared-use facilities, 2 – 5 door airlocks, and secure man-traps.

Product specifications
Low-voltage wiring	Connection count needs review
Preparation	Mount the lockable metal cabinet on a wall in a clean, dry location protected from the elements, using the supplied metal screws and anchors. Bring the selected actuators, locks, operators and door contacts to the unit. Select the application mode before wiring; make mode and Out2 changes with power off, since they take effect after a power reset. This ABM cabinet includes separate illuminated power and DAY/NITE switches. Safety devices connect directly to the operator control box as instructed.
Electrical	The relay module supply is 12/24V AC/DC on P1 terminals 1/2, non-polarized. P3 contains seven non-powered dry-input pairs: 1/2, 3/4, 5/6, 7/8, 9/10, 11/12 and 13/14. P4 has five NC/COM/NO triplets: 1/2/3, 4/5/6, 7/8/9, 10/11/12 and 13/14/15. Input and output functions depend on the chosen restroom, vestibule, airlock or mantrap mode; do not wire all available circuits by default. Each selected low-voltage supply, dry-input or COM/NO contact loop uses two external conductors. NC is an alternative contact state. Cabinet switch and internal relay connections remain local. Digital/card-reader wiring requires the exact selected interface. The official sources disagree on relay contact ratings; confirm the delivered rating before load selection. Physical cable runs and field gauge/type require the actual door layout.
Conditional connections	CX-EMF-2ABM relay power input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External matched supply to P1 terminals 1/2; when Installation configuration is Relay-module supply; cabinet internal power switch wiring remains local.; CX-EMF-2ABM selected dry input 1: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 1/2; when Installation configuration is Only when input 1 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected dry input 2: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 3/4; when Installation configuration is Only when input 2 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected dry input 3: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 5/6; when Installation configuration is Only when input 3 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected dry input 4: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 7/8; when Installation configuration is Only when input 4 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected dry input 5: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 9/10; when Installation configuration is Only when input 5 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected dry input 6: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 11/12; when Installation configuration is Only when input 6 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected dry input 7: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints External selected dry-contact device to P3 terminals 13/14; when Installation configuration is Only when input 7 is used by the selected mode; confirm contact state/function in that application.; CX-EMF-2ABM selected relay 1 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints P4 COM/NO 2/3 to External low-voltage controlled circuit; when Installation configuration is Only if relay 1 NO output is used by the chosen mode; NC alternative.; CX-EMF-2ABM selected relay 2 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints P4 COM/NO 5/6 to External low-voltage controlled circuit; when Installation configuration is Only if relay 2 NO output is used by the chosen mode; NC alternative.; CX-EMF-2ABM selected relay 3 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints P4 COM/NO 8/9 to External low-voltage controlled circuit; when Installation configuration is Only if relay 3 NO output is used by the chosen mode; NC alternative.; CX-EMF-2ABM selected relay 4 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints P4 COM/NO 11/12 to External low-voltage controlled circuit; when Installation configuration is Only if relay 4 NO output is used by the chosen mode; NC alternative.; CX-EMF-2ABM selected relay 5 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical run quantities require installation selection.; endpoints P4 COM/NO 14/15 to External low-voltage controlled circuit; when Installation configuration is Only if relay 5 NO output is used by the chosen mode; NC alternative.