Description
Series: CX-247
Type: 7 Day Timer
7 day timer – 24 V
Brand: Camden
Manufacturer Part Number: CX-247-24
Source: Camden Controls product page
Camden CX-247-24 – 7 day timer – 24 V
$75.00
7 day timer – 24 V
Camden Door Controls is an ultra compact programmable 7 day timer. It features a large digital display, and 16 flexible easy-to-program on/off schedules. An internal permacell keeps the programs and display readable in the event of a power loss or brownout.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Mount the timer using the four mounting screws. Use indoors, protected from moisture, extreme temperatures, shock and vibration. Set the clock and required ON/OFF days and times, then leave the timer in AUTO for programmed operation. Confirm scheduled unlocking and relocking with the connected controller or lock. |
| Electrical | This exact variant uses 24 V AC/DC. Match the supply to the timer label. Connect the supply to the POWER terminals. The timer output is labelled NC, NO and COM; use COM with the selected contact for the controlled low-voltage circuit. When activating an electromechanical device, follow the manual requirement for the supplied varistor across the timer output. The specification sheet gives conflicting contact ratings; confirm the delivered product rating before selecting a load. Contact ratings do not define supply voltage. Field cable gauge, route and physical run quantities depend on the selected circuits. |
| Conditional connections | CX-247-24 power input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical cable run quantity require installation selection.; endpoints External matched supply to Timer POWER terminals; when Installation configuration is Match the exact voltage variant.; CX-247-24 selected NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field gauge/type, route and physical cable run quantity require installation selection.; endpoints Timer COM and NO to External low-voltage controlled circuit; when Installation configuration is NO selection only; NC alternative and load logic require installation choice. |
Official manufacturer documents
- Specification Sheet (verified 2026-07-22)
- Specification Sheet (verified 2026-07-22)
- Installation Manual (verified 2026-07-22)
- Installation Manual (verified 2026-07-22)
Reviews
There are no reviews yet.