AutoDoor Experts

cx 12plus door interface relay – cx 12 plus: door interface relay

Camden CX-12Plus – Door Interface Relay

$75.00

Door Interface Relay

SKU: CX-12Plus

Category: Relays

Brands: Camden

Description
Reviews (0)

Description

Series: CX-12 Plus

Type: Door Interface Relay

Door Interface Relay

Brand: Camden

Manufacturer Part Number: CX-12Plus

Source: Camden Controls product page

Reviews

There are no reviews yet.

Be the first to review “Camden CX-12Plus – Door Interface Relay”

Camden CX-12 PLUS Door Interface Relay provides all the functionality of the CX-12 and the CX-22 combined into 1 package. In addition, a new Ratchet Relay mode is provided, making the CX-12 PLUS one of Camden's most versatile door control relays available. Used as a make/break relay (or Switching Network), it eliminates the binding of locked automatic doors, by delaying the door operator until the strike or maglock de-activates first.

Product specifications
Low-voltage wiring	Required
Basis	Structured, independently qualified product connection evidence
Preparation	Adjust the required operating mode and timers before applying power. The wrap-around sleeve provides access to LEDs, potentiometers and DIP switches; place the adjusted module in the operator header or secure it with the supplied Velcro. Complete secondary wiring before energizing. Wire safety devices directly to the operator control box as the manual instructs. Confirm mounting clearance and terminal access for the actual header.
Electrical	Power connects to terminals 1/2 for 12 or 24 volts AC or DC, non-polarized. The terminal table identifies relay 1 as NO3 COM4 NC5, relay 2 as NO6 COM7 NC8, WET1 as9/10, DRY1 as11/12, WET2 as13/14 and DRY2 as15/16. Wet inputs are powered; dry inputs are non-powered contacts. Each selected low-voltage input or COM/NO output loop needs two external field conductors; wet and dry alternatives and NC alternatives are not cumulative. Input functions and relay sequencing depend on the selected operating mode, including momentary, maintained, latching, sequencing or restroom operation. The manual smoke-mode prose conflicts with the terminal table by calling a powered-input pair a dry input; obtain the exact mode-specific diagram before using that interface. Receiver supply and output conductors are separate from the selected WET input pair. Select field cable gauge/type, routing and physical run quantities for the actual installation.
Electrical wiring required	Yes
Conditional connections	CX-12Plus power input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints External matched AC/DC supply to Terminals 1/2; when Installation configuration is Base supply; non-polarized.; CX-12Plus relay 1 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints Terminals 3 NO and 4 COM to External low-voltage controlled circuit; when Installation configuration is Selected NO circuit; NC terminal5 alternative; function depends on mode.; CX-12Plus relay 2 NO output: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints Terminals 6 NO and 7 COM to External low-voltage controlled circuit; when Installation configuration is Selected NO circuit; NC terminal8 alternative; function depends on mode.; CX-12Plus WET1 input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints External compatible powered output to Terminals 9/10; when Installation configuration is Only selected WET1 interface for actual mode. Alternatives are not cumulative; powered-device supply is separate.; CX-12Plus DRY1 input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints External dry contact to Terminals 11/12; when Installation configuration is Only selected DRY1 interface for actual mode. Alternatives are not cumulative; powered-device supply is separate.; CX-12Plus WET2 input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints External compatible powered output to Terminals 13/14; when Installation configuration is Only selected WET2 interface for actual mode. Alternatives are not cumulative; powered-device supply is separate.; CX-12Plus DRY2 input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable gauge/type and physical route/run quantities require installation selection.; endpoints External dry contact to Terminals 15/16; when Installation configuration is Only selected DRY2 interface for actual mode. Alternatives are not cumulative; powered-device supply is separate.