PIR request-to-exit motion sensor, white housing, visible activation LED Variant record generated from manufacturer nomenclature (https://commercial.schlage.com/content/dam/allegion-us-2/web-files/schlage/information-documents/Schlage_SCANII_Motion_Detector_Data_Sheet_103908.pdf); price inherited from product #4769 pending owner confirmation.
PIR request-to-exit motion sensor, white housing, visible activation LED Variant record generated from manufacturer nomenclature (https://commercial.schlage.com/content/dam/allegion-us-2/web-files/schlage/information-documents/Schlage_SCANII_Motion_Detector_Data_Sheet_103908.pdf); price inherited from product #4769 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Install the selected Scan II-W indoors using the matching wall or ceiling arrangement. Set the sensor angle for that mounting orientation, secure the lock-in-place adjustment and use the masking kit where the selected coverage requires it. Verify actual request-to-exit coverage and unwanted activations after fitting, then select the relay latch time and reset/fail-safe/fail-secure behavior required by the connected controller. Use the original model mounting instructions before fixing-hole preparation. |
| Electrical | The sensor has a 12/24 VDC or VAC power requirement and two form C relay contacts. The supplied text has no terminal or wiring instructions, cable specification or cable-run count, so a physical wired connection is not confirmed in the supplied text. |
| Conditional connections | Sensor operating power: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Power supply to Scan II-W; when Installation configuration is Base product power input at 12/24 VDC or 12/24 VAC. Terminal assignment and conductor count are not provided in the supplied text. |
Reviews
There are no reviews yet.