DPDT maintained x DPDT momentary Variant record generated from manufacturer nomenclature (https://us.allegion.com/content/dam/allegion-us-2/web-files/schlage/information-documents/Schlage_Key_Switch_Data_Sheet_103907.pdf); price inherited from product #4763 pending owner confirmation.
DPDT maintained x DPDT momentary Variant record generated from manufacturer nomenclature (https://us.allegion.com/content/dam/allegion-us-2/web-files/schlage/information-documents/Schlage_Key_Switch_Data_Sheet_103907.pdf); price inherited from product #4763 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Prepare the mounting area using the full-scale manufacturer 653 template and install in a standard single-gang box. Fit the selected compatible mortise cylinder and required blocking/spacer ring. The manufacturer recommended cutout has a minimum depth of 1-3/4 inch. |
| Electrical | The keyswitch has DPDT maintained and DPDT momentary switch contacts and a 5 amp @ 30 VDC contact rating. The supplied pages do not give terminal or wiring instructions, and no conductor count or cable run count. Whether the base product needs a physical wired connection is not explicitly stated. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | Scoped installation connections for 653-1415: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating Select the actual circuit and options. Field-conductor and cable-run counts are not established by contact/pole totals.; endpoints 653-1415 selected switch contacts to Selected external controlled circuit; separate optional LED supply and ATS monitor where fitted; when Installation configuration is Switch function: DPDT maintained x DPDT momentary Base circuit: Connect the selected key-operated switch contacts to the external controlled circuit according to the required NO/NC action and exact ordered function. Optional l2: Only when L2 is fitted, power the LEDs separately at 12/24 VDC; polarity is red positive, black negative in the installation diagram. Optional ats: Only when ATS is fitted, the anti-tamper contact closes with the cover on and requires its own selected monitoring circuit. Revision conflict: 2024 exact ordering list: maintained x momentary. 2017 function-chart text: momentary/momentary; directional action not asserted. |
Reviews
There are no reviews yet.