Benchmark low-energy operator, top-jamb, independent/simultaneous pair Variant record generated from manufacturer nomenclature (https://uslocksupply.com/products/lcn-9150-series-benchmark-electromechanical-door-operator-door-closer); price inherited from product #1236 pending owner confirmation.
Benchmark low-energy operator, top-jamb, independent/simultaneous pair Variant record generated from manufacturer nomenclature (https://uslocksupply.com/products/lcn-9150-series-benchmark-electromechanical-door-operator-door-closer); price inherited from product #1236 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Check the approved opening drawings, header and frame dimensions, and required clearances before installation. Prepare the header, frame and door for the selected push or pull mounting configuration using the applicable manufacturer template. |
| Electrical | The operator needs a 115 V mains supply and has cable connections to make during installation: ground, Hall Effect, motor power and control box power. The manual says to use copper conductors only and not to modify the factory wiring. Terminal-level detail depends on the control box wiring diagram, which is not in the supplied evidence. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | Mains power supply to the operator control box: cable runs quantity unspecified; 3 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Copper conductors; operator grounding to main-supply earth is required.; endpoints 115 V dedicated circuit at the side jamb to Operator control box; when Installation configuration is Base product. 115 V, single-phase, 60 Hz, fused 15 A, 3-wire supply with about 12 in of wire available at the side jamb; the manual recommends UL-approved flexible conduit.; Activate, safety, key switch and lock accessories: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Control box to Accessory device; when Installation configuration is Optional accessory selected: IF an activate, safety, key switch or lock accessory is selected. Connect as needed per the accessory instructions. Do not connect a remote activating device unless it is within line of sight of the door. |
Reviews
There are no reviews yet.