Description
Rugged Plastic Box, 6˝ Round
Optional accessory – can be used
w/ any 6˝ round actuator
LCN 8310-869S – Surface Mount Box
$25.00
Model 8310-869S. Installer-grade surface mount box.
Additional information
| Brand | LCN |
|---|
LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).
| Touchless actuator supply (8310-813) | 12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W) |
|---|---|
| 900 MHz receiver input voltage (8310-880) | 12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC |
| Wireless transmitter power consumption (900 MHz) | 30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX) |
| Receiver capacity | up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode |
| Low-voltage wiring | Not required |
| Preparation | The documents identify the 8310-869S as a rugged plastic 6" round surface mount box for use with any 6" round actuator. They give no box depth, cutout, wall preparation or power readiness, so preparation requirements cannot be stated. |
| Electrical | This empty actuator mounting box has no electrical connection of its own. Low-voltage wiring is not required for this part: zero cable runs; wire type is not applicable. Wiring for separately installed actuators or sensors remains a separate requirement. |
| Electrical wiring required | No |
Official manufacturer documents
- LCN touchless actuators & 900mHz transmitter and receivers bulletin (verified 2026-07-22)
- 8310-852WP/853WP Wireless Push Plates Installation Instructions (75.5316.01) (verified 2026-07-22)
- Push Plates 8310-818/-852/-853/-855/-856 Installation Instructions (75.5320.02) (verified 2026-07-22)
- 8310-813 Touchless Actuator Installation Instructions (75.0027.01) (verified 2026-07-22)
- 8310-880 900 MHz Transmitters & Receivers Installation Instructions (75.0023.01) (verified 2026-07-22)
Reviews
There are no reviews yet.