Model 8310-3134. Installer-grade retrofit cable.
5 in stock
Allows newer style Senior Swing
Digital Control to be activated by
existing switches when replacing
older control purchased prior to
September, 2006.
Also includes cables to allow
Safety Sensors to activate
Includes 8310-887 plus Safety
Sensor Cables
phone: 877-671-7011 n fax: 800-248-1460 n www.allegion.com/us n 009426 rev. 11/16
| Brand | LCN |
|---|
LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).
| Touchless actuator supply (8310-813) | 12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W) |
|---|---|
| 900 MHz receiver input voltage (8310-880) | 12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC |
| Wireless transmitter power consumption (900 MHz) | 30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX) |
| Receiver capacity | up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode |
| Low-voltage wiring | Required |
| Basis | Supply voltage: to be operated from SELV-compatible power supplies only. 12 – 24 VAC ±10% / 12 – 24 VDC +30% / -10% (LCN 8310-813 Touchless Actuator Installation Instructions, 75.0027.01); Wiring / Receiver table: Input Voltage 12 – 24 VAC / VDC (LCN 8310-880 900 MHz Transmitters & Receivers Installation Instructions, 75.0023.01) |
Reviews
There are no reviews yet.