AutoDoor Experts

LCN 8310-844 – Wall Mount Transmitter Kit, 1-Button, 9V (wire leads)

$25.00

Model 8310-844. Installer-grade transmitter.

SKU: 8310-844

Category: Miscellaneous

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Transmitter, Wireless, 1 Channel,
9v battery included
Use to convert standard wall
mount actuator to wireless
Requires 8310-865 Receiver

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-844 – Wall Mount Transmitter Kit, 1-Button, 9V (wire leads)”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Connection count needs review
Preparation	The supplied evidence says the 8310-844 converts a standard wall-mount actuator to wireless and requires the 8310-865 receiver. It does not document mounting depth, cutout, box or other site preparation for the transmitter itself. The listed kits pair it with 8310-856/852/853 actuators plus boxes and weather rings, but those are separate kit components and do not establish preparation for the standalone transmitter.
Electrical	The 8310-844 is a wireless, battery-powered transmitter (9V battery included) that converts a wall mount actuator to wireless. Its link to the receiver is radio. The separately specified 8310-865 receiver has its own wiring, which is not covered here. The supplied evidence does not describe how the transmitter's wire leads connect to the actuator switch.
Electrical wiring required	Yes
Conditional connections	Local push plate switch connection: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints 8310-844 transmitter wires to Push plate switch NO and COM contacts; when Installation configuration is Internal accessory connection; not field cable: In the manufacturer push plate configuration, connect the transmitter wires locally to the push plate switch. This does not establish an external cable pull or field cable conductor quantity.; Transmitter leads to push plate switch NO and COM contacts: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints 8310-844 transmitter leads to push plate switch NO and COM contacts; when Installation configuration is Applies only IF the transmitter is used in a push plate configuration to convert a wired push plate to wireless. This is a lead connection to the switch contacts, not a documented new field cable run.