AutoDoor Experts

Dormakaba RCI 9530 Door Position Switch

$50.00

Balanced magnetic contact and door position switch for monitoring status.

SKU: RCI-9530

Category: Sensors

Brands: Dormakaba

Description
Reviews (0)

Description

Balanced magnetic contact and door position switch for monitoring status. Brand: dormakaba. Manufacturer Part Number: RCI 9530. Source: https://www.dormakaba.com/us-en/offering/products/electronic-access-data/power-supplies

Reviews

There are no reviews yet.

Be the first to review “Dormakaba RCI 9530 Door Position Switch”

Balanced magnetic contact/door position switch, surface-mount switch and magnet set with magnetic tamper detection, using two Form C rhodium-plated reed switches of differing sensitivity encapsulated in epoxy within a solid aluminum case.

Product specifications
Voltage current	50mA Max, 100VDC
Switch configuration	SPDT with magnetic tamper
Dimensions	3-1/2"W x 1-1/4"H x 5/8"D (89mm x 32mm x 16mm)
Cable	18" armored cable, #22 AWG wire leads
Warranty	Lifetime limited
Features	End-of-line resistor compatible for supervised line operation; detects magnet shunting, door/window opening, external magnetic field tampering
Low-voltage wiring	Connection count needs review
Preparation	The 9530 is a surface-mount switch and magnet set. It needs a prepared mounting surface that fits the 3-1/2"W x 1-1/4"H x 5/8"D switch body. The documents give no mounting hardware, magnet gap or alignment spacing, and no cutout or drilling details. The magnet must be properly adjusted (balanced) for the tamper switch to be in its normal state.
Electrical	The switch is a wired surface-mount reed switch with an 18" armored cable carrying #22 AWG wire leads. The listed 50mA max, 100VDC figures are contact ratings for the switch, not a product power supply requirement. The sources do not state the field cable run, cable gauge or conductor count.
Preparation required	Yes
Electrical wiring required	Yes
Conditional connections	Switch output leads (factory armored cable with #22 AWG wire leads) for connection to the monitoring or alarm circuit. The endpoint is not documented.: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating Nonnumeric same-interface installation context (does not broaden the count condition): Contact: 9530 has SPDT door monitoring and magnetic tamper; end-of-line resistors may support a supervised line. Leads: 18-inch armored cable with #22 AWG leads is an assembly specification. Use the selected manufacturer configuration. Numeric field counts and cable-run quantities remain unknown unless separately stated. Prior same-interface description: Scoped installation connections for RCI-9530. Prior endpoint context: RCI-9530 documented terminals or leads to Selected external power and control circuits.; endpoints RCI 9530 switch to external monitoring circuit (not documented); when Installation configuration is Internal accessory connection; not field cable: Base product. The factory-attached 18" armored cable with #22 AWG leads is supplied with the switch. This is not a field cable count.; End-of-line resistors for a supervised line: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints end-of-line resistors to 9530 switch leads; when Installation configuration is Optional accessory selected: IF end-of-line resistors are used for a supervised line. The source says they may be used, and the resistor type and placement are not documented.