AutoDoor Experts
Account
New Quote
camden cx ed1079d – standard depth grade 1

Camden CX-ED1079D – Standard Depth Grade 1

$50.00

Standard Depth Grade 1

SKU: CX-ED1079D
Category:
Brands:

Description

Series: CX-ED1079 Series

Type: 'Universal' Gr. 1 Electric Strikes

Standard Depth Grade 1

Brand: Camden

Manufacturer Part Number: CX-ED1079D

Source: Camden Controls product page

Reviews

There are no reviews yet.

Be the first to review “Camden CX-ED1079D – Standard Depth Grade 1”

Your email address will not be published. Required fields are marked *

The CX-ED1079 series comprises the CX-ED1079 (low profile, 5/8" latch projection) and CX-ED1079D (standard depth, 3/4" latch projection) UL 1034/UL 294 listed 'Universal' Grade 1 ANSI electric strikes for cylindrical locksets. They offer field-selectable 12/24V AC/DC operation, fail-safe/fail-secure operation, and horizontal faceplate/body adjustment, with optional latch monitoring on both models.

Product specifications
Voltage 12/24V AC/DC selectable
Material (3) stainless steel faceplates included
Certification UL 1034, UL 294
Low-voltage wiring Connection count needs review
PreparationThis is the standard-depth strike. Use the purchased stainless-steel faceplates. Choose the correct faceplate and template for the actual hollow-metal, ANSI or wood frame and latch projection. Align the strike with the latch, mark and prepare the required mortise, and test-fit before fastening. For a hollow-metal frame use the supplied mounting brackets; for an existing ANSI preparation check the cutout and alter it only as required by the matching template. Use the documented wood-frame fasteners for wood. Confirm the actual depth and faceplate pattern rather than treating the drawing as a universal cutout. Preserve operation of exit/panic hardware. Select fail-secure or fail-safe with the mode screw/set plate as instructed and test latch engagement after adjustment.
ElectricalSelect the actual12/24V AC/DC supply and matching supplied voltage harness before connecting the strike. The voltage-selecting harness has two external supply connections; internal coil wires and joins are separate. For the documented DC cut-wire option,12V uses red/black positive and blue/green negative;24V uses red positive and green negative with black/blue joined locally. Fit the supplied varistor across the supply pair as shown. DC polarity annotations do not apply to an AC supply. The manual gives260mA at12V DC and150mA at24V DC; AC operation buzzes and DC is silent. This non-L variant has no latch-monitor connection; do not apply the optional L-only connector to it. Select fail mode, supply and monitoring use before scheduling cables. Physical cable runs, cable type, gauge and shielding are not established by these terminal or factory-tail counts.
Electrical wiring requiredYes
Conditional connectionsCX-ED1079D selected voltage-harness supply: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical cable-run quantities unspecified; factory tails and local joins separate.; endpoints Compatible selected12/24VAC/DC external supply to Matching supplied12V or24V strike harness; when Installation configuration is Select the supplied harness matching actual voltage; its two field connections are distinct from four internal coil tails. AC/DC choice follows supplied product rating.; CX-ED1079D 12VDC cut-wire power alternative: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical cable-run quantities unspecified; factory tails and local joins separate.; endpoints Compatible external 12VDC supply to Red/black positive and blue/green negative; when Installation configuration is Only when the documented cut-wire 12VDC configuration is used instead of the voltage harness; varistor across supply, local coil joins separate. Alternatives are not additive.; CX-ED1079D 24VDC cut-wire power alternative: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical cable-run quantities unspecified; factory tails and local joins separate.; endpoints Compatible external 24VDC supply to Red positive and green negative; black/blue local join; when Installation configuration is Only when the documented cut-wire 24VDC configuration is used instead of the voltage harness; varistor across supply, local coil joins separate. Alternatives are not additive.

Official manufacturer documents

Related products