Series: CM-3200 & CM-3500 Series
Type: Stainless Steel, 2 Gang, Flush Mount
Configuration: Double Gang Dual Cylinder Key Switch
Key Switch, (4) DPDT Maintained
Brand: Camden
Manufacturer Part Number: CM-3592
Source: Camden Controls product page
Camden Door Controls CM-3200/3500 Series flush mount key switches meet the demands of key switch controls, designed for use with standard 1", 1-1/8", or 1-1/4" mortise cylinders and accepting one or two cylinders with up to four switches. They are double gang width with heavy duty stainless steel faceplates and control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors.
| Faceplate | heavy duty double gang, 18 gauge stainless steel |
|---|---|
| Input voltage | 12-24V AC/DC |
| Contact rating standard | 6 A @ 30VDC |
| Contact rating optional | 15 A @ 30VDC |
| Lead wire | 18 AWG color coded soldered leads |
| Mortise cylinder size | 1", 1-1/8", or 1-1/4" |
| Switch count | up to 4 switches |
| Included hardware | brass cylinder lock ring, 4 socket/slotted screws, 4 tamperproof screws with driver |
| Dimensions | 4-1/2" (114mm) x 4-1/2" (114mm) |
| Low-voltage wiring | Required |
| Basis | Structured, independently qualified product connection evidence |
| Preparation | Fit the aluminum bracket against the stud behind the faceplate. Insert the separately purchased mortise cylinder from the front and align its side grooves with the bracket retainers. If irregular grooves prevent fitting, file the retainers slightly; never remove them completely. Tighten the brass cylinder lock ring to secure the bracket. Fit the supplied switch in the selected bracket hole with its spacer ring and threaded washer. Align the cam centrally over the switch and check key operation before fastening the unit to the selected switch box, wall or receptacle box with the supplied screws. Select the mounting arrangement and compatible cylinder for the installation. |
| Electrical | Official model description: Key Switch, (4) DPDT Maintained. The shared manual quantity column and some exact dual-cylinder model descriptions differ; verify the delivered assembly and manufacturer total-versus-per-cylinder interpretation before calculating overall conductors. For each used changeover pole, common plus NO or common plus NC requires two external conductors; common plus both NO and NC requires three. Each DPDT switch contains two independent poles. Do not join independent commons by assumption. These are low-voltage circuit conductor counts, not physical cable-run counts. The supplied 18 AWG soldered leads do not specify field cable gauge. Common is grey; momentary NO is blue and NC orange. The maintained-contact chart lists both throw leads orange, so identify the actual terminal function before connecting. Cable type, gauge, shielding and physical run quantities depend on the selected controller/device and site routing. Optional LED circuits remain separate and require their selected DC option instructions. The standard-contact parts table and family specification give different contact ratings; verify the fitted switch rating. Contact ratings are not supply requirements. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | Optional LED indicator power circuit: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Optional LED indicator to 12V or 24V indicator supply; when Installation configuration is Optional accessory selected: IF an LED indicator accessory option is selected. The base model does not include it.; Selected base selected switch pole 1: common and NO: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-3592 selected switch pole 1 common and NO; when Installation configuration is For selected switch pole 1, select common and NO. This is an alternative pole configuration; do not add it to the other alternatives for the same pole. Repeat for every used switch in the verified delivered assembly; total switch quantity is unresolved. No physical run count is inferred.; Selected base selected switch pole 1: common and NC: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-3592 selected switch pole 1 common and NC; when Installation configuration is For selected switch pole 1, select common and NC. This is an alternative pole configuration; do not add it to the other alternatives for the same pole. Repeat for every used switch in the verified delivered assembly; total switch quantity is unresolved. No physical run count is inferred.; Selected base selected switch pole 1: common, NO and NC: cable runs quantity unspecified; 3 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-3592 selected switch pole 1 common, NO and NC; when Installation configuration is For selected switch pole 1, select common, NO and NC. This is an alternative pole configuration; do not add it to the other alternatives for the same pole. Repeat for every used switch in the verified delivered assembly; total switch quantity is unresolved. No physical run count is inferred.; Selected base selected switch pole 2: common and NO: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-3592 selected switch pole 2 common and NO; when Installation configuration is For selected switch pole 2, select common and NO. This is an alternative pole configuration; do not add it to the other alternatives for the same pole. Repeat for every used switch in the verified delivered assembly; total switch quantity is unresolved. No physical run count is inferred.; Selected base selected switch pole 2: common and NC: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-3592 selected switch pole 2 common and NC; when Installation configuration is For selected switch pole 2, select common and NC. This is an alternative pole configuration; do not add it to the other alternatives for the same pole. Repeat for every used switch in the verified delivered assembly; total switch quantity is unresolved. No physical run count is inferred.; Selected base selected switch pole 2: common, NO and NC: cable runs quantity unspecified; 3 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-3592 selected switch pole 2 common, NO and NC; when Installation configuration is For selected switch pole 2, select common, NO and NC. This is an alternative pole configuration; do not add it to the other alternatives for the same pole. Repeat for every used switch in the verified delivered assembly; total switch quantity is unresolved. No physical run count is inferred. |
Reviews
There are no reviews yet.