AutoDoor Experts
Account
New Quote
cm 1200 cm 2200 series – cm 1200 & cm 2200 series: stainless steel, flush mount

Camden CM-1200 – Key Switch, SPST Momentary, N/O

$75.00

Key Switch, SPST Momentary, N/O

SKU: CM-1200
Category:
Brands:

Description

Series: CM-1200 & CM-2200 Series

Type: Stainless Steel, Flush mount

Configuration: Single Gang Faceplate

Key Switch, SPST Momentary, N/O

Brand: Camden

Manufacturer Part Number: CM-1200

Source: Camden Controls product page

Reviews

There are no reviews yet.

Be the first to review “Camden CM-1200 – Key Switch, SPST Momentary, N/O”

Your email address will not be published. Required fields are marked *

Camden Door Controls CM-1200 and CM-2200 Series flush mount key switches meet the demands of key switch controls, designed for use with standard 1", 1-1/8", or 1-1/4" mortise cylinders. CM-1200 is single gang (2-3/4" wide) and CM-2200 is narrow style (1-3/4" wide); both accept one or two switches and control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors.

Product specifications
Faceplate heavy duty stainless steel
Input voltage 12-24V AC/DC
Contact rating standard 6 A @ 30VDC
Contact rating optional 15 A @ 30VDC
Lead wire 18 AWG color coded soldered leads
Mortise cylinder size 1", 1-1/8", or 1-1/4"
Width (CM-1200) 2-3/4" (70mm)
Width (CM-2200) 1-3/4" (44mm)
Included hardware brass cylinder lock ring, 2 socket/slotted screws, 2 tamperproof screws with driver
Low-voltage wiring Required
BasisStructured, independently qualified product connection evidence
PreparationFit the aluminum bracket against the stud behind the faceplate. Insert the separately purchased mortise cylinder from the front and align its side grooves with the bracket retainers. If irregular grooves prevent fitting, file the retainers slightly; never remove them completely. Tighten the brass cylinder lock ring to secure the bracket. Fit the supplied switch in the selected bracket hole with its spacer ring and threaded washer. Align the cam centrally over the switch and check key operation before fastening the unit to the selected switch box, wall or receptacle box with the supplied screws. Select the mounting arrangement and compatible cylinder for the installation.
ElectricalBase configuration: Key Switch, SPST Momentary, N/O. The SPST switch contact requires two external conductors for the controlled circuit. These are low-voltage circuit conductor counts, not physical cable-run counts. The supplied 18 AWG soldered leads do not specify field cable gauge. SPST lead connections are black. Cable type, gauge, shielding and physical run quantities depend on the selected controller/device and site routing. Optional LED circuits remain separate and require their selected DC option instructions. The standard-contact parts table and family specification give different contact ratings; verify the fitted switch rating. Contact ratings are not supply requirements.
Preparation requiredYes
Electrical wiring requiredYes
Conditional connectionsOptional LED indicator: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints LED leads to 12 VDC or 24 VDC supply; when Installation configuration is Optional accessory selected: IF the optional LED indicator accessory is selected. LEDs are DC only.; Selected base switch 1: SPST contact: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified. Supplied18AWG solderedleads do not establish field cable gauge.; endpoints Selected low-voltage controlled equipment to CM-1200 switch 1 SPST contact; when Installation configuration is Base standard SPST controlled circuit. Use only the supplied switches/poles needed by the controlled equipment. No physical run count is inferred.

Official manufacturer documents

Related products