The 6400 Series is a modular, fire rated strike that lets the user move, or even remove, the keeper, ramp or plug. Offered with both centerline and offset faceplates, it is the ultimate all-in-one strike.
The 6400 Series is a modular, fire rated strike that lets the user move, or even remove, the keeper, ramp or plug. Offered with both centerline and offset faceplates, it is the ultimate all-in-one strike.
Brand: Von Duprin
Manufacturer Part Number: VON-6400-SERIES
Source: Official product page
The 6400 Series is a modular, fire-rated electric strike with a non-handed internal solenoid design, engineered for configurable installation with vertical and horizontal adjustment, adaptable to centerline and offset latchbolt applications in cylindrical and mortise locks.
| Voltage | Field-selectable 12/24 VDC or 12/24 VAC |
|---|---|
| Current | 12 VDC: 0.375 Amp continuous duty; 24 VDC: 0.19 Amp continuous duty; 12/24 VAC: 0.28-0.565 Amp intermittent duty |
| Strength | Static strength 1500 lbs; Dynamic strength 70 ft-lbs |
| Dimensions | Standard 4-7/8" faceplates (offset and centerline); 1-3/8" vertical opening adjustable within 3-1/8" range; 1-3/4" backbox depth |
| Other | Latch throw 3/4"; heavy-duty stainless steel, BHMA 630 finish; 3-hour fire-rated to UL 10C (fail-secure only); UL 1034 listed; UL 294 listed |
| Low-voltage wiring | Connection count needs review |
| Preparation | The strike is installed in a prepared frame cutout. ANSI-prepped frames are cut using a template; frames without ANSI prep need a lock centerline transfer and a template cut. Mounting tabs may be needed. The strike requires a 1-3/4" backbox depth. A power supply is also required (see wiring). |
| Electrical | Use the supplied 6400 harness and a compatible UL Listed burglary/access-control supply. For 12VDC, join RED/BLUE to positive and BLACK/YELLOW to negative; for 24VDC, join YELLOW/BLUE locally, RED to positive and BLACK to negative. The manual also permits 12-24 VAC with polarity unobserved and its specified intermittent duty; DC uses the listed continuous-duty configuration. Install the supplied non-polarized MOV across the harness power wires/terminals as instructed. If a suppression diode is separately required, observe its polarity. The optional latch monitor is a separate SPDT contact circuit; its 2 Amp at 24VDC rating is not the strike supply requirement. The local lead joins and MOV are not separate field cable runs; choose actual cable specification and routing from the selected installation. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | Strike power input via supplied harness at 12 VDC or 12-24 VAC: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints strike wire harness (red, blue, black, yellow) to UL Listed burglary/access control power supply; when Installation configuration is Base product; applies when 12 VDC or 12-24 VAC input is used. RED and BLUE to positive, BLACK and YELLOW to negative. The harness lead boundary and field cable run are not documented.; Strike power input via supplied harness at 24 VDC: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints strike wire harness (red, black, yellow, blue) to UL Listed burglary/access control power supply; when Installation configuration is Base product; applies when 24 VDC input is used. YELLOW and BLUE are joined together, RED goes to positive and BLACK to negative. The field cable run is not documented.; MOV inductive kickback suppressor across power leads: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints strike positive and negative harness wires or terminals to MOV; when Installation configuration is Applies to meet BHMA A156.31. The MOV is installed across the positive and negative wires or terminals and is not polarity sensitive. This is a local component connection, not a separate cable run. |
Reviews
There are no reviews yet.