The 660 Series concealed remote button is designed for under the counter or concealed desk to remotely release a single entry locking device.
The 660 Series concealed remote button is designed for under the counter or concealed desk to remotely release a single entry locking device.
Brand: Schlage
Manufacturer Part Number: SCH-660-SERIES-REMOTE-RELEASE
Source: Official product page
The Schlage 660 Series is a concealed remote button for under-counter or desk applications used to remotely release electric or electronic locking mechanisms (electric strikes, electromagnetic locks, electrified locks). Available as a momentary pushbutton (660-PB) or maintained toggle switch (660-TA), both surface-mounted in a compact aluminum box.
| Switch contact rating | 5A @ 30 VDC |
|---|---|
| Dimensions | 1"H x 2"W x 2"D |
| Models | 660-TA (SPDT maintained toggle), 660-PB (SPDT momentary pushbutton) |
| Mount type | surface mount |
| Applications | electric strikes, electromagnetic locks, electrified locks |
| Low-voltage wiring | Connection count needs review |
| Preparation | The 660 Series is a surface-mount unit in a mini aluminum box, about 2" x 2" x 1". It needs a mounting location such as under a desk or counter. Installation instruction documents are listed but were not supplied, so detailed mounting steps are not extracted. |
| Electrical | Select either the 660-T4 SPDT maintained toggle or the 660-PB SPDT momentary pushbutton and wire the contact function required by the controlled locking circuit. The datasheet specifies a switch contact rating of 6 amp at 120 VAC; that rating is not a requirement to supply the button with mains power, and it does not establish a DC switching rating. Confirm suitability for the actual controlled circuit, including a manufacturer-confirmed DC contact rating if needed, before specifying the connection. The datasheet does not establish the number of field conductors, cable gauge, routes or physical runs. |
| Preparation required | Yes |
| Conditional connections | Switch contact connection to the controlled locking-device release circuit: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints 660 Series SPDT switch contacts to controlled electric/electronic locking device circuit; when Installation configuration is Base product, as used to remotely release a locking device. Terminals used (NO/NC/common), conductor count and cable runs are not documented in the supplied evidence. |
Reviews
There are no reviews yet.