Electric horn with strobe, 24 VDC Variant record generated from manufacturer nomenclature (https://commercial.schlage.com/en/products/system-accessories/1910-series-electric-horns.html); price inherited from product #4771 pending owner confirmation.
Electric horn with strobe, 24 VDC Variant record generated from manufacturer nomenclature (https://commercial.schlage.com/en/products/system-accessories/1910-series-electric-horns.html); price inherited from product #4771 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Flush mounting needs a 4-inch back box recessed in the wall, and the flush mount plate is fixed to it. The manufacturer page also says a standard one- or two-gang box. Surface mounting uses the included surface back box with pull-through wiring. Field wiring is completed before the horn strobe assembly is attached. Before installation, the audio and strobe brightness switches on the back may be set. The unit ships set to high-volume interrupted code. Power must be removed before the settings are changed. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | 24 VDC power to the horn strobe: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints 24 VDC power supply (+)/(-) to 1910S-1 mounting plate power terminals; when Installation configuration is Base 1910S-1 typical wiring (Figure 2). The cable count and conductor count are not documented.; Activation through the monitor strike switch and/or door position switch: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Monitor strike switch to Door position switch to 1910S-1 horn strobe positive terminal; when Installation configuration is Optional accessory selected: IF the horn strobe is to signal a latchbolt retraction or door opening using the monitor strike and door position switches, as in the typical wiring. These switches are external devices. The routing and number of cables are not documented. |
Reviews
There are no reviews yet.