AutoDoor Experts

LCN 8310-867F – Surface Mounted Actuator

$50.00

Model 8310-867F. Installer-grade surface mounted actuator.

SKU: 8310-867F

Category: Actuators

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Flush Mount Box
Rugged Plastic Box
4-3/4˝ Square
Optional accessory – can be used
w/ any 4-3/4˝ square actuator

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-867F – Surface Mounted Actuator”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Not required
Preparation	The 8310-867F is a 4-3/4" square plastic flush-mount box. The 8310-853 hard-wired actuator is designed to mount in a flush or surface mount box on a vertical surface near the controlled door. The 8310-867F's own installation depth, cutout and rough-in dimensions are not documented in the supplied text.
Electrical	This empty actuator mounting box has no electrical connection of its own. Low-voltage wiring is not required for this part: zero cable runs; wire type is not applicable. Wiring for separately installed actuators or sensors remains a separate requirement.
Electrical wiring required	No