LCN 8310-854ERA – Protective Rain Cover

$25.00

Model8310-854ERA. Protective rain cover accessory for the8310-854 microwave motion sensor.

SKU: 8310-854ERA

Brands: LCN

Description

Cover used w/ 8310-854 Header
Mount Activation Sensor
Optional

Brand	LCN

There are no reviews yet.

Be the first to review “LCN 8310-854ERA – Protective Rain Cover”

Protective rain cover accessory for the LCN 8310-854 header-mounted microwave motion sensor.

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Not required
Preparation	Clean and dry the mounting surface, position the manufacturer template and drill the mounting holes for two screws. Route the separate sensor harness through the cover and gasket, then through the microwave sensor as its guide specifies. Attach the sensor and rain cover to the wall or door frame without pinching the harness. The sensor terminal connections belong to the separately installed sensor; this rain cover has no electrical connection of its own.
Electrical	This mechanical sensor rain cover has no electrical connection of its own. Low-voltage wiring is not required for this part: zero cable runs; wire type is not applicable. Wiring for separately installed actuators or sensors remains a separate requirement.
Preparation required	Yes
Electrical wiring required	No