AutoDoor Experts

LCN 8310-847 – Door Mount Harness, Safety Sensor Wiring

$25.00

Model 8310-847. Installer-grade handheld remote control.

SKU: 8310-847

Category: Wires

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Used with 8310-804-1 or 8310-
804-2 Door Mount Safety Sensor,
must order separately.
Used with Senior Swing only, must
order separately

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-847 – Door Mount Harness, Safety Sensor Wiring”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Connection count needs review
Electrical	The evidence identifies the item as a harness for the door mount safety sensor. It gives no terminal, conductor, cable-run or routing detail, so a physical wiring requirement is not stated for the base product.