AutoDoor Experts

LCN 8310-3888 – Safety Module Harness for 7900-Series Pneumatic Control Box

$25.00

Model 8310-3888. Installer-grade safety module kit.

SKU: 8310-3888

Category: Miscellaneous

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Safety module, service part
Safety Module Harness for
pneumatic control box
phone: 877-671-7011 n fax: 800-248-1460 n www.allegion.com/us n 009426 rev. 11/16

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-3888 – Safety Module Harness for 7900-Series Pneumatic Control Box”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Connection count needs review
Electrical	The part is a wiring harness for the pneumatic control box safety module. The supplied evidence gives no terminal assignments, conductor counts, endpoints or cable runs, so whether field wiring is required cannot be determined.
Conditional connections	Safety module harness for the pneumatic control box. Per the manufacturer, the 8310-3889 kit that includes this harness is required when an 8310-877 header mount safety sensor is used with pneumatic automatic operators.: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints pneumatic control box (7901/7902/7981/7982) to safety module; when Installation configuration is Optional accessory selected: IF the safety module or 8310-3889 kit is selected, for example when an 8310-877 header mount safety sensor is used with a pneumatic operator. Not part of the base operator. Endpoints and the field-cable versus internal-lead role are not documented.