AutoDoor Experts

LCN 8310-3856WS – Flush Mount Kit

$50.00

Model 8310-3856WS. Installer-grade flush mount kit.

SKU: 8310-3856WS

Category: Actuators

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Actuator, 4-1/2˝ Round, Logo, Wireless
Includes 8310-856 Actuator, 8310-844 Transmitter, 8310-868S Surface
Box, 8310-800 Weather/Trim Ring
Requires 8310-865 Receiver (not part of kit)

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-3856WS – Flush Mount Kit”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Not required
Preparation	The kit includes a surface box (8310-868S) and a weather ring, but the supplied evidence documents no mounting depth, cutout, surface requirement or site prerequisite, so preparation is not stated either way.
Electrical	The 8310-3856WS is a wireless actuator whose transmitter signals the separate 8310-865 receiver, so the base product itself is documented as wireless. The receiver and control box wiring is separate and not part of this base product. Power for the transmitter (battery or batteryless) is not stated in the supplied evidence.
Preparation required	Yes
Electrical wiring required	No