AutoDoor Experts

LCN 8310-3855WS – Flush Mount Kit

$50.00

Model 8310-3855WS. Installer-grade flush mount kit.

SKU: 8310-3855WS

Category: Actuators

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Actuator, 4-3/4˝ Square, Logo, Text, Dual Vestibule, Wireless
Includes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867S Surface
Box, 8310-801 Weather/Trim Ring
Requires 8310-865 Receiver (2) (not part of kit)

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-3855WS – Flush Mount Kit”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Not required
Preparation	Arrange a surface-mount installation using the included8310-867S mounting box. Retain the included8310-801 weather ring. Provide a compatible8310-865 receiver for wireless operation; install and connect the receiver under its own instructions. Use the exact box installation instructions to establish opening or fixing requirements.
Electrical	The kit is a wireless dual-vestibule actuator that includes two 8310-844 transmitters. The separately sold 8310-865 receiver is required and is not part of the kit. Any wiring belongs to the receiver and is not extracted here. Transmitter power source and internal wiring are not documented in the supplied lines, so the 'no' rests on the wireless designation and the receiver exclusion alone.
Preparation required	Yes
Electrical wiring required	No