AutoDoor Experts

LCN 8310-3852WS – Surface Mount Kit

$110.00

Model 8310-3852WS. Installer-grade flush mount kit.

SKU: 8310-3852WS

Category: Actuators

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

6˝ Round, Logo, Wireless,
Includes 8310-852 Actuator, 8310-844 Transmitter, 8310-869S Surface
Box, 8310-802 Weather/Trim Ring
Requires 8310-865 Receiver (not part of kit)

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-3852WS – Surface Mount Kit”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Connection count needs review
Preparation	Arrange a surface-mount installation using the included8310-869S mounting box. Retain the included8310-802 weather ring. Provide a compatible8310-865 receiver for wireless operation; install and connect the receiver under its own instructions. Use the exact box installation instructions to establish opening or fixing requirements.
Electrical	The manufacturer lists this as a wireless actuator kit and specifies a compatible8310-865 receiver. Receiver installation is a separate requirement. The kit component list does not specify a field conductor or cable-run count.
Preparation required	Yes