AutoDoor Experts
Account
New Quote
Awaiting product image

Dormakaba RCI 7 Series Centerline Electric Strike

$50.00

Centerline strike designed around five-eighth inch latch projections.

SKU: RCI-7-SERIES
Category:
Brands:

Description

Centerline strike designed around five-eighth inch latch projections. Brand: dormakaba. Manufacturer Part Number: RCI 7 Series. Source: https://www.dormakaba.com/us-en/offering/products/electronic-access-data/electric-strikes

Additional information

fail_mode

fail safe, fail secure

Reviews

There are no reviews yet.

Be the first to review “Dormakaba RCI 7 Series Centerline Electric Strike”

Your email address will not be published. Required fields are marked *

Centerline mortise electric strike accommodating 5/8" latch projections, compatible with door thicknesses 1-3/8" to 2-3/8", for aluminum, cylindrical, centerline mortise locks and exit devices.

Product specifications
Voltage 280mA 11-16VAC, 12VDC, 24VACVDC (at 12VDC)
Strike type Centerline mortise
Strength 500lbf static; 70 ft-lb dynamic
Endurance 250,000 cycles
Fail mode Fail-Secure and Fail-Safe options
Faceplate Multiple profiles (models 7104, 7105, 7107 and variants)
Finish Brushed stainless steel (32D)
Insert depth 1-1/2" (38mm)
Latch accommodation 5/8" (16mm)
Horizontal adjustment 1/8" (3.2mm)
Certification UL 1034 burglary-resistant listed
Warranty 5-year limited
Low-voltage wiring Connection count needs review
PreparationThe strike needs a prepared frame cut-out with a documented depth of 1-1/2" (38mm). A trim plate is included to cover an irregular frame cutout. The strike is used with doors 1-3/8" to 2-3/8" thick and accommodates a 5/8" latch projection. The pivot has 1/8" of horizontal adjustment for alignment. The cut-out width and height are not given in the supplied text.
ElectricalThe page lists an electrical rating of 280mA at 12VDC, with 11-16VAC, 12VDC and 24VAC/VDC given as supply options. It does not document terminals, leads, cable runs or conductor counts.
Preparation requiredYes
Electrical wiring requiredYes
Conditional connectionsScoped installation connections for RCI-7-SERIES: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating Use the selected manufacturer configuration. Numeric field counts and cable-run quantities remain unknown unless separately stated.; endpoints RCI-7-SERIES documented terminals or leads to Selected external power and control circuits; when Installation configuration is Base power: Incoming supply wiring connects to strike insert terminal screws; match the ordered insert voltage. Polarity: Observe correct polarity if a suppression diode is required.

Official manufacturer documents

Related products