Centerline strike accommodating three-quarter inch latch projection with multiple faceplate options.
Centerline strike accommodating three-quarter inch latch projection with multiple faceplate options. Brand: dormakaba. Manufacturer Part Number: RCI 4 Series. Source: https://www.dormakaba.com/us-en/offering/products/electronic-access-data/electric-strikes
| fail_mode | fail safe, fail secure |
|---|
Centerline mortise electric strike accommodating 3/4" latch projections with multiple faceplate options for various door frame types and materials.
| Voltage | 11-16VAC, 12VAC/VDC, 24VAC/VDC (at 12VDC) |
|---|---|
| Current | 200mA |
| Strike type | Centerline, mortise |
| ANSI grade | ANSI/BHMA A156.31, Grade 1 |
| Strength | 1,500 lbf static; 70 ft-lb dynamic (varies by faceplate) |
| Fail mode | Field-selectable Fail-Secure & Fail-Safe |
| Faceplate | Multiple options (04, 14, 05, 07, 08, 19) |
| Insert depth | 1-1/2" (38mm) |
| Door thickness | 1-3/8" to 2-3/8" |
| Finish | Brushed stainless steel (32D) |
| Fire rating | Optional 1-1/2-hour (fail-secure only, 04 & 14 faceplates) |
| Endurance | 500,000 cycles (fire-rated); 250,000 cycles (other models) |
| Warranty | 5-year limited |
| Low-voltage wiring | Connection count needs review |
| Preparation | The strike needs a frame cut-out of 1-1/2 in (38 mm) depth. It accommodates a 3/4 in latch projection and suits door thicknesses of 1-3/8 in to 2-3/8 in. Mounting tabs and fasteners are included, and a trim plate is included to cover an irregular frame cutout. A frame prep jig (4/7JIG) is listed as an accessory. |
| Electrical | This is an electric strike with a coil that is not polarity sensitive. It is rated 200mA at 12VDC, 11-16VAC, 12VAC/VDC or 24VAC/VDC. The supplied text does not document terminals, leads, cable gauge, conductor count or the number of cable runs. |
| Conditional connections | Power to the strike coil (not polarity sensitive): cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints external low-voltage supply to strike coil; when Installation configuration is Base product. The coil is documented as non-polarity-sensitive and rated 12VAC/VDC or 24VAC/VDC. Whether the connection is made via factory leads or a field cable is not documented.; Scoped installation connections for RCI-4-SERIES: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating Use the selected manufacturer configuration. Numeric field counts and cable-run quantities remain unknown unless separately stated.; endpoints RCI-4-SERIES documented terminals or leads to Selected external power and control circuits; when Installation configuration is Base power: Incoming supply wiring connects to strike insert terminal screws; match the ordered insert voltage. Polarity: Observe correct polarity if a suppression diode is required. |
Reviews
There are no reviews yet.