AutoDoor Experts
Account
New Quote
camden cx da100 – door alarm, sounder, single gang, 3 24 vdc

Camden CX-DA100 – Door alarm, sounder, single gang, 3-24 VDC

$50.00

Door alarm, sounder, single gang, 3-24 VDC

SKU: CX-DA100
Category:
Brands:

Description

Series: CX-DA100/200/300 Series

Type: Line Powered Door Monitors

Door alarm, sounder, single gang, 3-24 VDC

Brand: Camden

Manufacturer Part Number: CX-DA100

Source: Camden Controls product page

Reviews

There are no reviews yet.

Be the first to review “Camden CX-DA100 – Door alarm, sounder, single gang, 3-24 VDC”

Your email address will not be published. Required fields are marked *

Camden CX-DA Series door alarms feature a rugged design with heavy duty stainless steel faceplates, and provide an affordable and easy to implement solution to the common issue of doors being used, propped or held open without alerting facility or security staff.

Product specifications
Low-voltage wiring Connection count needs review
PreparationThe unit mounts flush in a single-gang back box that is not included. The box depth specified is 2.5 inches. Power must be available at the unit.
ElectricalCX-DA100 is the basic sounder: it sounds when energized by 12 – 24 VDC, with documented current draw of 18 mA. The manufacturer describes a magnetic door contact closing the supply circuit in a door-control application. The shared installation sheet illustrates terminal-block, diode, input and relay-output procedures for the relay-equipped units; it does not establish the exact DA100 power-terminal assignment or an independent alarm relay. Confirm the delivered sounder polarity and connection instructions. Do not apply the DA200/DA300 AC supply, delay or relay wiring to this model. Select the door contact and its switched-current capability, field cable specification, route and physical runs for the actual circuit.
Preparation requiredYes
Electrical wiring requiredYes
Conditional connectionsDC power supply to the sounder, switched through a magnetic door contact: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints 12-24 VDC power supply to CX-DA100 terminals 1 and 2 (12 V) or diode leads (24 V); when Installation configuration is Base product. 12 V operation connects to screw terminals 1 and 2 after removing the diode leads. 24 V operation connects to the leads with diodes, which are not polarity sensitive. The door contact closing the circuit supplies power to the CX-DA100. The shared instruction sheet covers all three models and its terminal wiring is not CX-DA100-specific, so the CX-DA100 terminal assignment is not confirmed.

Official manufacturer documents

Related products