Description
L&Z mounting bracket for CX-EPD0009 magnetic cabinet lock Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CX_EPD0009); price inherited from product #3221 pending owner confirmation.
Camden CX-CL-LZBRK – L&Z mounting bracket for CX-EPD0009 magnetic cabinet lock
L&Z mounting bracket for CX-EPD0009 magnetic cabinet lock Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CX_EPD0009); price inherited from product #3221 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | For a normal hinged door, position the L bracket near the upper corner with at least 3/8 inch (10 mm) clearance so the door closes. Mark and pilot-drill the mounting holes; fasten the L bracket to the frame and the Z bracket to the door with the specified supplied hardware. Assemble the Z bracket loosely, align the plate pin with the cabinet lock, then tighten. For a sliding door, follow the separate sliding-door procedure in section 5 and align both brackets before final tightening. |
| Preparation required | Yes |
Related products
-
ACCESS-SYSTEM-READERS-READER-KEYPADS – CV Series: Access Control System Readers
$0.00 -
AURA-TM-ILLUMINATED-ENCLOSURERS – CM-54, CM-55 & CM-57 Series: Illuminated Push Plate Enclosures & Kits
Price range: $25.00 through $50.00 -
Camden 60-36D002-V2 – Replacement PC board, 600lb magnet w/ TLS/TDS
-
Camden 60-36D003-V2 – Replacement PC board, 1200lb magnet, V1 open pin connector
-
Camden 60-36D004-V2 – Replacement PC board, 1200lb magnet w/ TLS/TDS
Reviews
There are no reviews yet.