Description
Series: CM-SR Series
Type: Receiver and Transmitters
Configuration: Transmitter
Ultra compact two button key fob
Brand: Camden
Manufacturer Part Number: CV-WTX2
Source: Camden Controls product page
Series: CM-SR Series
Type: Receiver and Transmitters
Configuration: Transmitter
Ultra compact two button key fob
Brand: Camden
Manufacturer Part Number: CV-WTX2
Source: Camden Controls product page
The CM-SR Series is a high-security 868.35MHz wireless system consisting of the CM-SRX2 stand-alone relay receiver (rolling code, 19 trillion combinations, 2-channel, 30 transmitter capacity, IP65 rated, built-in antenna) and the CV-WTX2 ultra-compact two-button fob transmitter. It is designed to activate locking devices such as electric strikes and automatic gate/door operators for one- or two-door access control.
| Voltage | 12V or 24V AC/DC (CM-SRX2 receiver) |
|---|---|
| Frequency | 868.35 MHz |
| Current draw | CM-SRX2: 80mA max; CV-WTX2 fob: 12mA |
| Relay | (1) SPST normally open, 1st relay momentary, 2nd momentary or latching/bi-stable, SPST normally closed, 1A @ 30 VDC |
| Temperature | CM-SRX2: -4°F to 185°F (-20°C to +85°C); CV-WTX2: -4°F to 131°F (-20°C to +55°C) |
| Dimensions | CM-SRX2: 2-17/32"W x 3-3/4"H x 2-7/32"D (64mm x 95mm x 56mm); CV-WTX2: 1-15/32"W x 2-5/32"H x 3/8"D (37mm x 55mm x 10mm) |
| Low-voltage wiring | Connection count needs review |
| Preparation | Select the intended receiver and button-to-door assignments, then enrol each required transmitter button using the receiver programming procedure and verify the resulting door action. The manufacturer identifies this exact item as the compact two-button key fob; receiver wall-mount hardware and cable-entry preparation belong to the receiver. Confirm any desired fixed-mount accessory and battery-access procedure for the delivered fob before installation. |
| Electrical | CV-WTX2 is a two-button radio fob powered by a CR2032 type battery at 3 VDC. Its internal battery is separate from the receiver supply and controlled lock circuits. Select each button assignment at the compatible CM-SRX2 receiver. The CM-SRFM2 kit manual explicitly includes this fob and describes programming individual channels, either relay or both; relay-two bi-stable mode affects resulting behavior. Confirm the required door action and test each enrolled button. Do not apply receiver power or relay contact ratings to the fob. |
Reviews
There are no reviews yet.