Description
433MHz extension antenna for MProx-BLE controller, 8ft coax Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CV_603); price inherited from product #3634 pending owner confirmation.
433MHz extension antenna for MProx-BLE controller, 8ft coax Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CV_603); price inherited from product #3634 pending owner confirmation.
433MHz extension antenna for MProx-BLE controller, 8ft coax Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CV_603); price inherited from product #3634 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Locate the CV-603EA antenna to improve the receiver radio path around metal or other obstructions, using its mounting bracket and suitable anchors for the supporting surface. Route the coax through the selected enclosure/wall entry without creasing or kinking it. Confirm the actual supplied cable length before positioning: the manual identifies2.5 m/8 ft2 in, while the exact product row describes8 ft/2 m. Use the delivered cable and original routing instructions; do not assume these inconsistent lengths provide the same reach. |
| Electrical | This is the433 MHz external antenna assembly for the MProx-BLE receiver. The manual directs the coax center core to ANT and braided shield to GND at the antenna section of CV-603. This is an RF/coax connection. Keep it distinct from DC power, reader data and lock-control wiring; the center core and shield are not an ordinary two-wire DC feed. The supplied antenna lead does not establish quantities of other field cables. |
Reviews
There are no reviews yet.