36\” x 4.5\” Column™ aluminum push plate switch, anodized clear finish with built-in Kinetic no-battery wireless transmitter, receiver required
Series: CM-74/75 & CM-84/85 Series
Type: Column™ Push Plate Switches
Configuration: 4.5" Wide
36" x 4.5" Column™ aluminum push plate switch, anodized clear finish with built-in Kinetic no-battery wireless transmitter, receiver required
Brand: Camden
Manufacturer Part Number: CM-7436K
Source: Camden Controls product page
| graphic | /1 no graphic, /2 wheelchair, /20 wheelchair+foot icon, /2AL wheelchair+arrow left, /2AR wheelchair+arrow right, /3 push to open, /4 wheelchair+push to open, /40 wheelchair+push to open, /4AL wheelchair+push to open, /4AR wheelchair+push to open, /80 lock (red)+foot icon, /8B lock+push to lock, /8C lock symbol, /A2 active wheelchair, /A20 active wheelchair+foot i, /A4 active wheelchair+push t, /A40 active wheelchair+push t |
|---|
Camden's CM-74 and CM-75 Series top-activation Column push plate switches are surface mounted and designed for installations with no obstruction above the unit, offering a discreet appearance. The CM-84 and CM-85 Series side-activation Column switches are two-piece units with a surface-mounted back box, designed for use when an overhead obstruction prevents a top-activation model, when mounting on a narrow curtain wall, or when the unit must pass through a glass panel.
| Contact rating standard models | 15 A @ 30VDC |
|---|---|
| Contact rating vr models | 1 A @ 30VDC |
| Voltage vr models | 12 to 24 VDC +/- 10% |
| Contact type standard | momentary contact switch, single pole double throw, Form C |
| Contact type vr | common/normally open/normally closed |
| Depth (CM-84/85) | 2-1/4" (32mm) |
| Width (CM-74) | 4-1/2" |
| Width (CM-75) | 6" |
| Width (CM-84) | 4-1/2" |
| Width (CM-85) | 6" |
| Low-voltage wiring | Not required |
| Preparation | CM-7436K is a top-load (CM-74 series) surface-mounted Column switch with leveling screws and no back box. The Kinetic wireless option is documented as requiring 2 wall cut-outs of 1-1/8"W x 1-7/8"H x 1-3/4"D. This is the only documented wall preparation. The rendered page shows these notes on the top-load aluminum dimensions, but it is not clear which cut-out note belongs to which model, so the cut-outs are attributed to the Kinetic option generally. Mounting-surface and fastener details are not documented in the supplied evidence. |
| Electrical | CM-7436K has a built-in Kinetic no-battery wireless transmitter and requires a receiver. The base product's activation path is therefore wireless. Receiver wiring belongs to the separately specified receiver and is not part of this product's wiring. No receiver model or wiring was supplied. |
| Preparation required | Yes |
| Electrical wiring required | No |
Reviews
There are no reviews yet.