4-1/2″ surface mount enclosure only (needs CM-49A) Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/products/CM_49_CM_79_CM_59S_CM_89S); price inherited from product #3614 pending owner confirmation.
4-1/2″ surface mount enclosure only (needs CM-49A) Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/products/CM_49_CM_79_CM_59S_CM_89S); price inherited from product #3614 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | CM-49B is the surface base and must be used with CM-49A. Prepare the base pilot holes, level and mark the supporting wall, drill for appropriate anchors and fasten the base as the original manual shows. If the optional gasket is used, attach it to the rear of B and provide the intended wire opening. Fit A and the selected switch with matching kit hardware, preserving wiring or radio-component clearance. Confirm the delivered components match the original manual revision before using its fixing layout. |
| Electrical | The brochure describes the CM-49 family as indoor/outdoor, wired or wireless. This is an enclosure only, and no wiring requirement for CM-49B itself is documented. Wiring depends on the switch installed. |
Reviews
There are no reviews yet.