AutoDoor Experts
Account
New Quote
camden cm 30e – (1) english

Camden CM-30E – (1) English

$50.00

(1) English

SKU: CM-30E
Category:
Brands:

Description

Series: CM-30 Series

Type: Square LED Illuminated Push/Exit Switch

Configuration:

(1) English

Brand: Camden

Manufacturer Part Number: CM-30E

Source: Camden Controls product page

Reviews

There are no reviews yet.

Be the first to review “Camden CM-30E – (1) English”

Your email address will not be published. Required fields are marked *

Camden Door Controls CM-30U and CM-30E are 'Universal' illuminated exit switches with an economical 2" square high-visibility button, stainless steel single-gang faceplate, and a UL-listed SPDT switch rated 10 amps momentary. They are supplied with long-life LEDs and a complete range of field-installable red, green, and blue insert labels.

Product specifications
Voltage 12/24 VDC
Current draw LED Bulb: 14 mA
Contact type SPDT Form 'C' Momentary
Contact rating 10 Amps @ 30 VAC
Std finish US32/C32D
Dimensions 4-1/2"H x 2-3/4"W x 2-1/2"D (114.3mm x 69.9mm x 63.5mm)
LED life 100,000 hours
Low-voltage wiring Connection count needs review
PreparationUse the selected CM-30 switch original drawing and a deep single-gang box with clearance for its contact block, illumination assembly and connections. Fit the supplied color-coded terminal leads as shown, connect only the required functions, tuck wiring into the box and fasten the faceplate with the specified screws. Verify the actual button/label arrangement and illumination configuration before applying power.
ElectricalThe installer pushes color-coded leads onto the switch terminals and connects them to the devices. The Red and Black leads serve the illumination and can be removed if illumination is not needed. The 12/24 V DC LED supply is separate from the Form C momentary switch contact. The diagram was not legible as a wiring diagram, so lead-to-terminal assignments and cable counts are not extracted.
Conditional connectionsLED illumination power (Red and Black leads): cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints switch LED terminals to 12 or 24 V DC supply; when Installation configuration is Applies only if illumination is used. The Red and Black wires can be removed if illumination is not required. Use 12 V or 24 V DC only. For 24 V leave the in-line resistor on, and for 12 V cut it off. The role of the Red and Black leads as field-cable connections is inferred from the manual wording; the connection to the DC supply is not explicitly stated as a field cable.; Momentary Form C switch contact to the controlled device: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints switch contact terminals to controlled device (e.g. lock power or controller input); when Installation configuration is The installer connects the appropriate wires to their devices. Which of the Form C terminals (NO, NC or common) are used depends on the application, and the terminal assignment was not read from the diagram.

Official manufacturer documents

Related products