ValueWave™, SS Narrow faceplate 12/24VDC, 1 Relay, with Override
Series: CM-221 & CM-222 Series
Type: ValueWave™ Touchless Switches
Configuration: Wave To Exit
ValueWave™, SS Narrow faceplate 12/24VDC, 1 Relay, with Override
Brand: Camden
Manufacturer Part Number: CM-221M/46N
Source: Camden Controls product page
| graphic | /40 hand icon, /41 hand icon + wave to open, /42 hand icon+wave to open+w, /43 hand icon + wave to lock, /44 hand icon + wheelchair, /46 hand icon + wave to exit, /A42 hand icon + active wheel, /A44 hand icon+wave to open+a |
|---|
Camden's CM-221 and CM-222 Series ValueWave touchless switches provide hands-free activation to reduce germ spread, offering industry-leading reliability and performance. Ideal for indoor or outdoor use as part of an automatic door or access control system, they are designed for easy installation and trouble-free service in high-traffic applications.
| Operating voltage | 12-24 VDC +/- 10% |
|---|---|
| Power requirement | filtered and regulated DC power supply required |
| Current draw | 45 mA (peak) |
| Contact rating | 1 amp @ 30VDC |
| Contacts | (1) Form C contact, common/N.O./N.C. |
| Response time | 10 ms |
| Temperature range | 14°F to 122°F (-10°C to +50°C) |
| Sensor range | 2" to 8" (5 to 20cm), adjustable |
| Time delay | 0.5 to 20 seconds, adjustable, with toggle operation |
| IP rating | IP 65 |
| Faceplate | heavy gauge stainless steel |
| Low-voltage wiring | Connection count needs review |
| Preparation | Use the narrow stainless-steel faceplate and matching narrow gasket; the manual lists CM-23D as the mullion surface-box option. Confirm the delivered box depth and use its actual mounting template before drilling. Fit with the supplied mounting screws. Set detection range, output duration/toggle and internal/external LED mode for the application. Measure the DC supply before connection and isolate every unused lead individually. |
| Electrical | Use filtered, regulated 12 to 24 VDC within +/-10%; never connect AC. Peak draw is 45 mA. Sensor harness: red power positive, black ground, green relay NO, blue COM, purple NC, yellow remote green LED and white remote red LED. Manual-override harness: red NC, black COM, white NO. These are distinct harnesses despite repeated colours. For the illustrated door-operator input, the sensor NO/COM and manual NO/COM operate in parallel and share a two-conductor external operator connection; the DC supply uses a separate two-conductor external connection. Keep maglock/strike configurations separate. For remote LED control install the mode jumper and pull yellow or white to ground; plan the return path for the actual remote controller. Both contact ratings are 1 A at 30 VDC, not power-supply requirements. Select field cable gauge/type, routing and physical run quantities for the chosen configuration. |
| Conditional connections | CM-221M/46N regulated DC power input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type/gauge, routing and jacket/run quantity unspecified.; endpoints External filtered regulated DC supply to Sensor red positive and black ground; when Installation configuration is Illustrated door-operator circuit only; maglock/strike alternatives and remote LED routing require their own design.; CM-221M/46N parallel IR/manual operator input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type/gauge, routing and jacket/run quantity unspecified.; endpoints IR NO/COM and manual NO/COM locally paralleled to External low-voltage door-operator input; when Installation configuration is Illustrated door-operator circuit only; maglock/strike alternatives and remote LED routing require their own design. |
Reviews
There are no reviews yet.