Description
Series: CM-221 & CM-222 Series
Type: ValueWave™ Touchless Switches
Configuration: Wave To Open
ValueWave™ Touchless Switch, Double Gang,
Brand: Camden
Manufacturer Part Number: CM-221/A42W
Source: Camden Controls product page
ValueWave™ Touchless Switch, Double Gang,
Series: CM-221 & CM-222 Series
Type: ValueWave™ Touchless Switches
Configuration: Wave To Open
ValueWave™ Touchless Switch, Double Gang,
Brand: Camden
Manufacturer Part Number: CM-221/A42W
Source: Camden Controls product page
| graphic | /40 hand icon, /41 hand icon + wave to open, /42 hand icon+wave to open+w, /43 hand icon + wave to lock, /44 hand icon + wheelchair, /46 hand icon + wave to exit, /A42 hand icon + active wheel, /A44 hand icon+wave to open+a |
|---|
Camden's CM-221 and CM-222 Series ValueWave touchless switches provide hands-free activation to reduce germ spread, offering industry-leading reliability and performance. Ideal for indoor or outdoor use as part of an automatic door or access control system, they are designed for easy installation and trouble-free service in high-traffic applications.
| Operating voltage | 12-24 VDC +/- 10% |
|---|---|
| Power requirement | filtered and regulated DC power supply required |
| Current draw | 45 mA (peak) |
| Contact rating | 1 amp @ 30VDC |
| Contacts | (1) Form C contact, common/N.O./N.C. |
| Response time | 10 ms |
| Temperature range | 14°F to 122°F (-10°C to +50°C) |
| Sensor range | 2" to 8" (5 to 20cm), adjustable |
| Time delay | 0.5 to 20 seconds, adjustable, with toggle operation |
| IP rating | IP 65 |
| Faceplate | heavy gauge stainless steel |
| Low-voltage wiring | Required |
| Cable type | low-voltage control wire (gauge not stated in text) |
| Conductor count | config-dependent (see wiring diagram) |
| Runs per unit | 1 home run per unit to controller (field/design dependent) |
| Basis | Connect the two trigger wires from the door operator to the blue and green wires on the CM-221. |
Reviews
There are no reviews yet.