5800 Pro, pull side, regenerative drive, no external power required Variant record generated from manufacturer nomenclature (https://media.topnotchinc.com/docs/catalogs/Norton%20Rixson%20Operators%20Catalog.pdf); price inherited from product #0 pending owner confirmation.
5800 Pro, pull side, regenerative drive, no external power required Variant record generated from manufacturer nomenclature (https://media.topnotchinc.com/docs/catalogs/Norton%20Rixson%20Operators%20Catalog.pdf); price inherited from product #0 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | 5811 is the pull-side PRO regenerative operator. Match the delivered mounting plate, arm and push/pull arrangement to the actual door and frame before preparing fixing locations. Use its original mounting template and verify support and unobstructed door movement. Select actual activation and power configuration rather than assuming all 5800 models are regenerative or all require a wired supply. Include only the lock/occupancy and button interfaces actually supplied with the selected kit, then configure and test the chosen operation. |
| Electrical | The exact PRO model definition states no electrical power or wiring is required for its regenerative arrangement. Manual door operation charges its onboard battery pack. Keep that base arrangement distinct from PRO PLUS externally powered operation and from separately installed wired lock/controller accessories. Confirm the actual ordered configuration and traffic/charging requirements; a regenerative operator claim does not describe the complete access-control system wiring. |
| Conditional connections | Wireless Interface Module (WIM) power input and hardwired interfaces (push buttons, electric lock, AUX output, operator connection cable): cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Wireless Interface Module to 24VDC power to hardwire push buttons to electric lock to operator plug-in cable connector; when Installation configuration is Optional accessory selected: IF the optional Wireless Interface Module is selected. The catalogue says the WIM can be used with any 5800 model, and the ordering table lists it as an optional part for the 5811 kits. Cable counts, conductor counts and gauge are not documented. |
Reviews
There are no reviews yet.