8100 series, pull side, dual (pair) doors, track arm Variant record generated from manufacturer nomenclature (https://www.recorddoors.com/us/en/market-product-assets/products/swing-doors/8100/documents/selection-guide/record-8100-8200-selection-guide.pdf); price inherited from product #0 pending owner confirmation.
8100 series, pull side, dual (pair) doors, track arm Variant record generated from manufacturer nomenclature (https://www.recorddoors.com/us/en/market-product-assets/products/swing-doors/8100/documents/selection-guide/record-8100-8200-selection-guide.pdf); price inherited from product #0 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | 8152 is dual simultaneous inswing with track arms. Match the actual opening, handing, header, arm and reveal to this exact manufacturer drawing before preparation. Provide the illustrated blocking/structural support and verify header/door travel clearances against the original drawing and site measurements. Select low- or high-energy operation and the corresponding safety systems/guide rails for the actual application; the drawing expressly makes that a configuration decision. The general brochure and another arm/handing arrangement are not substitutes for the exact opening drawing. |
| Electrical | The exact opening drawing calls for 120V,15A,60Hz,1phase at the power entry. Treat 15A as the documented supply provision rather than measured running current. The 8100 family brochure separately identifies the 24VAC motor and auxiliary 24VAC supply; those are separate from the incoming mains circuit. Confirm delivered controller/energy configuration and actuator, safety, lock and monitoring interfaces before connection. Motor voltage, accessory output and opening-drawing callouts do not establish field conductor or cable-run counts. |
Reviews
There are no reviews yet.