PIR request-to-exit motion sensor, black housing, visible activation LED Variant record generated from manufacturer nomenclature (https://commercial.schlage.com/content/dam/allegion-us-2/web-files/schlage/information-documents/Schlage_SCANII_Motion_Detector_Data_Sheet_103908.pdf); price inherited from product #4769 pending owner confirmation.
PIR request-to-exit motion sensor, black housing, visible activation LED Variant record generated from manufacturer nomenclature (https://commercial.schlage.com/content/dam/allegion-us-2/web-files/schlage/information-documents/Schlage_SCANII_Motion_Detector_Data_Sheet_103908.pdf); price inherited from product #4769 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | The datasheet documents site prerequisites: indoor use only, a mounting height of 7 to 15 ft, and wall or ceiling mounting with separate pattern angle settings for each. The sensor comes apart in 3 pieces for mounting and angle adjustment. The datasheet does not document a mounting box depth, cutout or fasteners. |
| Electrical | The sensor documents a DC/AC power requirement and relay contacts, which suggests wired power and control. However, the supplied text does not state the physical field cabling, terminal assignments or conductor counts, so the wiring boolean stays unknown. |
| Preparation required | Yes |
| Conditional connections | Sensor power input: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Scan II-B to external 12/24 VDC or VAC supply; when Installation configuration is Base product power. The documented draw is 35 mA at 12 VDC and 38 mA at 24 VDC when activated, or 42 mA at 12 VAC and 48 mA at 24 VAC when activated. Standby is 38 mAh.; Relay output to the controlled circuit: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Scan II-B form C relay contacts to external controlled circuit; when Installation configuration is Base product relay circuit, separate from power. Two form C relays are rated 2.0 A at 30 VDC or VAC maximum for a DC resistive load. Which contacts are used depends on the installation, and fail safe or fail secure is field-selectable. |
Reviews
There are no reviews yet.