ValueWave touchless single gang switch w/ manual override Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/ValueWave_Touchless_Switches); price inherited from product #2673 pending owner confirmation.
ValueWave touchless single gang switch w/ manual override Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/ValueWave_Touchless_Switches); price inherited from product #2673 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | Confirm the selected single-gang faceplate and matching compatible mounting box before preparing the opening; narrow and double-gang family options use different plates and boxes. Provide sufficient depth, wiring clearance and gasket placement using the original model drawing and listed mounting-box options. Use the supplied faceplate screws/tamper-proof hardware as appropriate, leave the sensing face clear and test the selected sensing distance and time delay after mounting. Allow access to the separate manual-override button. Do not use a family face dimension as a universal cutout template. |
| Electrical | Operating voltage is 12 to 24 VDC, within the documented tolerance, with 45 mA peak current. The manual prohibits AC input. Keep the DC input separate from the Form C relay contacts and any selected remote LED-triggering circuit. The sensor relay contact rating is 1 A at 30 VDC; this describes the controlled circuit. The manual-override pushbutton has its own Common/NO/NC contacts, also rated 1 A at 30 VDC. Select actual contact use, local/remote LED control and operating mode from the matching diagram before field conductor, cable-gauge or run quantities. Other faceplate and indicator-color variants must remain distinct. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | 12-24 VDC power to the sensor (red +, black -): cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints CM-221M 7-wire harness red (12-24 VDC) and black (0 VDC) to DC power supply (e.g. CX-PS13); when Installation configuration is Base product power connection; DC only, not AC. Whether the harness leads are extended by field cable is not documented.; Sensor relay output (green NO, blue COM, purple NC) to the controlled device: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints CM-221M 7-wire harness green/blue/purple relay wires to Maglock, door operator or strike circuit; when Installation configuration is Base product control connection. Only the terminals needed for the chosen NO or NC action are used; the maglock example uses blue and purple. Unused conductors should be individually isolated and taped.; Manual override pushbutton (3-wire harness: red NC, black COM, white NO): cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Manual override pushbutton 3-wire harness to CM-221M circuit / controlled device; when Installation configuration is CM-221M includes the manual override pushbutton. It is wired in series with the controlled circuit as shown in the diagrams (e.g. maglock: NC to maglock +, COM to purple wire). |
Reviews
There are no reviews yet.