Exterior industrial key switch, diecast, NEMA 1/2/3R/4/6/12/13/ICS, 2 N/O Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CI_1K_Exterior_Use_Key_Switches_Industrial); price inherited from product #3541 pending owner confirmation.
Exterior industrial key switch, diecast, NEMA 1/2/3R/4/6/12/13/ICS, 2 N/O Variant record generated from manufacturer nomenclature (https://www.camdencontrols.com/products/CI_1K_Exterior_Use_Key_Switches_Industrial); price inherited from product #3541 pending owner confirmation.
| Low-voltage wiring | Connection count needs review |
|---|---|
| Preparation | The installer must provide a 3/4-14 conduit to fit the threaded hole of the housing. The cover is removed with the key after the four cover screws are taken out. Wires must leave ample clearance inside the box so the switches can be inserted when the front cover plate is refitted, and must clear the switch activating cam. |
| Electrical | The key switch is wired to the operator. The instructions direct electrical connections to follow the wiring instructions included with the operator. On the CI-1KX, the two orange leads are tied together and connected to the operator feed. Yellow is the OPEN lead and blue is the CLOSED lead. The schematic shows two key-operated contacts, Open and Close. The number of field cables and conductors is not documented. |
| Conditional connections | Operator feed to the two orange leads, tied together, as the common side of the Open and Close contacts: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints CI-1KX orange leads (tied together) to Operator feed; when Installation configuration is Base CI-1KX without stop button. The example in the instructions defers to the operator's wiring instructions. |
Reviews
There are no reviews yet.