AutoDoor Experts

Dormakaba RCI 9512/13 Bridge Cables

$25.00

Bridge cables for transferring current to door-mounted locks.

SKU: RCI-9512-13

Category: Wires

Brands: Dormakaba

Description
Reviews (0)

Description

Bridge cables for transferring current to door-mounted locks. Brand: dormakaba. Manufacturer Part Number: RCI 9512/13. Source: https://www.dormakaba.com/us-en/offering/products/electronic-access-data/power-supplies

Reviews

There are no reviews yet.

Be the first to review “Dormakaba RCI 9512/13 Bridge Cables”

Bridge cables (9512/9513) used to transfer current to electric locks mounted in the door, recessed in the hinge side of the door/frame and concealed when the door is closed for tamper-resistance.

Product specifications
Conductor options	4-conductor @ 22 gauge or 2-conductor @ 18 gauge
Model 9512	Visible face 1"W x 12-3/4"H (25mm x 324mm); recessed 7/8"W x 10-3/16"H (23mm x 259mm)
Model 9513	Visible face 1"W x 21-7/16"H (25mm x 545mm); recessed 7/8"W x 18-7/8"H (23mm x 479mm)
Material	Steel, Bright Chrome (26) finish
Warranty	1-year limited
Low-voltage wiring	Connection count needs review
Preparation	Select the 9512 or 9513 transfer to suit the actual door swing. The manual assigns 9512 to outswinging doors up to 120 degrees and 9513 to doors with a swing of 120 degrees or greater; confirm the model at the shared boundary before preparation. Locate the case and wire entries using the selected model drawing. Prepare the door pocket 7/8 inch wide and 5/8 inch deep; the 9513 instructions specify 18-7/8 inch pocket length. Drill the door and frame wire holes no larger than 1/2 inch as shown, run the selected cable through the flexible coil and secure the case and coil with the specified hardware. Use the original model drawing for lengths, fixing centers and clearances; do not scale it or treat overall case dimensions as every cutout dimension.
Electrical	The product is a conductor cable that carries current to an electric lock mounted in the door, so it is a physical wired product. It comes in 4-conductor 22 gauge or 2-conductor 18 gauge versions. The documents do not give terminations, endpoints or the number of cable runs, and they do not say which conductor version applies to this SKU.
Preparation required	Yes
Electrical wiring required	Yes