AutoDoor Experts
Account
New Quote
hes 7000 series

HES 7000 Series

$50.00

The dual, preload solution for cylindrical latch bolts and rim exit devices.

SKU: HES-7000-SERIES
Category:
Brands:

Description

The dual, preload solution for cylindrical latch bolts and rim exit devices.

Brand: HES

Category: Electric Strikes

List Price Range: $325 – $522

Source: HES product page

Additional information

finish

605, 606, 612, 629, 630

Reviews

There are no reviews yet.

Be the first to review “HES 7000 Series”

Your email address will not be published. Required fields are marked *

The HES 7000 Series offers two solutions to address preloaded doors. Its in-frame adjustable feature allows the installer to easily adjust the electric strike opening to accommodate the horizontal position of the latchbolt after installation.

Product specifications
Voltage 12/24
Body Material Stainless steel
Grade Grade 1
Static Strength (lbs) 1,500 (791 and 792 options); 1,000 (783S, 786S, 789S options)
Dynamic Strength (ft-lbs) 70 (791/792 options); 50 (783S/786S/789S options)
Endurance (cycles) 1,000,000
Fail Safe | Fail Secure Field selectable fail safe/fail secure
Monitoring Installation Factory Configured
Monitoring Options Latchbolt Monitoring
Lock Type Exit Device|Cylindrical Lock
Adjustability Horizontal
Frame Material Metal|Wood|Aluminum
Latchbolt Accommodation Up to 5/8"
Preload Accommodation Up to 15 lbs. (fail secure only)
Strike Body Depth (in) 1.6875
Strike Body Height (in) 4.87
Strike Body Width (in) 1.25
Included in Box 7000 Series Electric Strike Body, 12-Volt and 24-Volt Plug In Connectors, Pigtail Connectors
Low-voltage wiring Required
BasisStructured, independently qualified product connection evidence
PreparationPrepare the frame using the manufacturer cutout template for the selected lockset and faceplate. Connect strike power and install the strike in the jamb using the supplied hardware for the actual option kit.
ElectricalUse the plug-in connector marked 12 VDC or 24 VDC to match the actual system voltage, and verify input voltage before connection. The black connector wire is negative. Optional monitoring contacts are separate from strike power.
Preparation requiredYes
Electrical wiring requiredYes
Conditional connectionsLatchbolt monitor (LBM) switch output: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints LBM leads: white common, orange normally open, green normally closed to monitoring or access control input; when Installation configuration is Optional accessory selected: IF the latchbolt monitor option is present and used. The LBM is separate from solenoid power. Contact rating is 500 mA at 30 V. The monitoring endpoint and the cable count are not documented. The strike is listed as factory configured for monitoring.; Strike power connection for 7000: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating Use the manufacturer supply/duty specification for the exact model; actual cable length and gauge are installation-specific.; endpoints Selected strike power/control circuit to Strike voltage-labelled plug-in connector or power pigtail; when Installation configuration is Use the actual manufacturer voltage and operating-mode configuration. The power connection is separate from optional monitoring. Internal coil links, pigtail lead count and controller contacts do not establish one total field conductor count or cable-run quantity.

Official manufacturer documents

Related products