The most advanced, modular electric strikes that work with every brand of cylindrical or mortise locks designed to work with a 4-7/8\” strike plate.
The most advanced, modular electric strikes that work with every brand of cylindrical or mortise locks designed to work with a 4-7/8" strike plate.
Brand: HES
Category: Electric Strikes
List Price Range: $612 – $1,154
Source: HES product page
| finish | 605, 606, 612, 629, 630 |
|---|
The HES 1500 Series is a heavy-duty, low-profile electric strike solution for latchbolt locks, accommodating every brand of cylindrical or mortise lock designed to work with a 4-7/8" strike plate. It is field selectable fail safe/fail secure with a field-adjustable integrated shim and interchangeable faceplates.
| Voltage | 12/24 |
|---|---|
| Power Source | Hardwired |
| Current 12v DC (mA) | 240 |
| Current 24v DC (mA) | 120 |
| Actuator Type | Solenoid |
| Body Material | Stainless steel |
| Grade | Grade 1 |
| Static Strength | 1500 lbs (per Feature list) |
| Dynamic Strength (ft-lbs) | 70 |
| Endurance (cycles) | 1,000,000 |
| Fail Safe | Fail Secure | Field selectable fail safe/fail secure |
| Monitoring Installation | Factory Configured|Field Installable |
| Lock Type | Cylindrical Lock|Mortise Lock |
| Handing | Non-handed |
| Adjustability | Horizontal |
| Frame Material | Metal|Wood |
| Latchbolt Accommodation | Up to 3/4" |
| Fire Rating – Single Door | 3 Hour (Fail Secure Only) |
| Fire Rating – Double Door | 1.5 Hour (Fail Secure Only) |
| Fire Rated | Yes |
| Windstorm Resistant | Yes |
| Included in Box | 1500 Series, Trim Enhancer with #6-32 x 3/16" Screws, 5/64" Hex Wrench, 12 & 24 Volt Plug In Connectors, #12-24 x 1/2" Mounting Screws (Complete Pac option includes 1LB faceplate) |
| Low-voltage wiring | Required |
| Basis | Structured, independently qualified product connection evidence |
| Preparation | The strike is surface mounted into the frame, which requires cutting. The frame (metal or wood) must be prepared, with the strike's horizontal centerline aligned to the lockset centerline. The faceplate and jamb prep depend on the lock type and frame material. Metal jamb prep uses faceplates 1J, 1KM, 1NM, 1KD, 1ND or 1NTD. Wood jamb prep uses 1DB-2 or 1LB-2. The faceplate options are specified by lockset type, and the Complete Pac option includes a 1LB faceplate. Power must be ready at a voltage matching the plug-in connector. |
| Electrical | Solenoid ratings: 12 VDC or 24 VDC for continuous duty; 12-16 VAC or 24 VAC only for intermittent duty, limited to 10% duty cycle and 2 minutes maximum on-time. Use the appropriate voltage-labelled connector and verify input voltage before connecting. Select the actual fail-secure or fail-safe configuration and treat optional monitoring circuits separately. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | Optional lock monitor (LM) switch circuit, White and Tan leads, open when door is open: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Strike lock monitor leads (White, Tan) to Monitoring/control input; when Installation configuration is Optional accessory selected: IF the lock monitor option is selected or installed. Contact rating 500 mA at 30 V. Monitoring is factory configured or field installable. Cable run count is not documented.; Optional strike monitor (LMS) switch circuit, Brown common, Yellow normally open, Blue normally closed: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints Strike monitor leads (Brown, Yellow, Blue) to Monitoring/control input; when Installation configuration is Optional accessory selected: IF the strike monitor option is selected or installed. Contact rating 500 mA at 30 V, shown in unpowered condition. Yellow (NO) and Blue (NC) are alternatives and do not imply using all leads. Cable run count is not documented.; Strike supply connection: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Match the manufacturer voltage and duty specifications; size actual conductors using the installation-specific length/current table. Nonnumeric installation context (does not broaden the selected count): Use the connector for the selected manufacturer supply-voltage and duty configuration. Optional monitor circuits and internal coil-configuration links do not establish the total field cable count.; endpoints External power supply and selected control contact to HES 1500 selected voltage-matched strike power-input connector; when Installation configuration is Selected matching12 or24VDC pigtail at external power interface; operating mode chosen separately. Two conductors terminate at the strike power interface only. Internal coil links, optional monitors, earth and field cable/run/jacket quantities are excluded. This is not a universal total for other configurations. |
Reviews
There are no reviews yet.