Description
Series: CX-WEC Series
Type: Emergency Call For Universal Restrooms
Single Gang Multi-Color LED Dome Light w/ Sounder
Brand: Camden
Manufacturer Part Number: CM-AF142SO
Source: Camden Controls product page
Single Gang Multi-Color LED Dome Light w/ Sounder
Series: CX-WEC Series
Type: Emergency Call For Universal Restrooms
Single Gang Multi-Color LED Dome Light w/ Sounder
Brand: Camden
Manufacturer Part Number: CM-AF142SO
Source: Camden Controls product page
Camden CX-WEC Series equipment kits are Emergency Call System packages for universal and barrier-free restrooms, meeting current OBC building code requirements. Kits include a 'PRESS FOR EMERGENCY ASSISTANCE' push button, audible and visual annunciators inside and outside the restroom, and instructional signage, with white-only or multi-color (red/green/blue/white) LED dome lights with adjustable sounder available.
| Warranty | 3 year warranty |
|---|---|
| Faceplate | single gang stainless steel (CM-450R/12 push button) |
| Sign | CM-SE21 white panel sign, 12.5" x 8.5" (317.5mm x 216mm) |
| Languages | English, French and Bilingual (suffix 'F' for French, 'FE' for French/English, 'SP' for Spanish) |
| Component power (CM-AF142SO) | 12/24 VAC/VDC |
| Compliance | City of Toronto compliant package (CX-WEC12-TS & CX-WEC13-TS) includes 33-1/2" vertical ribbon switch |
| Low-voltage wiring | Required |
| Basis | Structured, independently qualified product connection evidence |
| Preparation | Mount the CM-AF142SO on a standard single-gang electrical box. Place the supplied gasket between the base and box and secure the base with 6-32 screws. Fit the O-ring in the front channel with a small opening left at the bottom. Insert the large bottom lens tab first, snap the top tabs into place, and fit the Phillips locking screw at the bottom of the base. Apply the required labels. Adjust flash rate using the potentiometer and adjust sound volume with the rear screw; counter-clockwise reduces volume and clockwise increases it. |
| Electrical | Low-voltage field wiring is required. The CX-WEC10CK2 manual specifies 12/24 VAC/VDC for CM-AF142SO; when integrated with Camden restroom controls, DC must be used. Measure the supplied voltage on both DC and AC ranges before connection. For the documented kit wiring, black is common; choose the red, green or blue lead for the corresponding color, or combine all three color leads for white. Physical cable-run quantity, field wire type, gauge and shielding are not specified; confirm the controller and site cable schedule. |
| Preparation required | Yes |
| Electrical wiring required | Yes |
| Conditional connections | Selected color lead switched through the CM-AF540SO N/O contact (terminal 4) to activate the dome light; terminal 3 goes to supply positive, in the CX-WEC10CK2 configuration: cable runs quantity unspecified; conductor count unspecified; wire type not documented; size unspecified; shielding unspecified; rating unspecified; endpoints CM-AF142SO red, blue or green lead (all three for white) to CM-AF540SO N/O terminal 4 to CM-AF540SO terminal 3 to supply positive (+V); when Installation configuration is Applies only to the CX-WEC10CK2 kit configuration. The red, green or blue lead sets the color, and all three leads together make white. The factory lead versus field cable boundary is not documented. |
Reviews
There are no reviews yet.