Battery Powered Touchless Switch, Wireless, Built-In 915MHZ. Spread Spectrum Wireless Transmitter. Narrow version requires 1-5/8\” deep surface mount box.
Series: CM-331/332/333/336/324/325 Series
Type: SureWave™ Touchless Switches
Configuration: Touchless Switch, Battery Powered
Battery Powered Touchless Switch, Wireless, Built-In 915MHZ. Spread Spectrum Wireless Transmitter. Narrow version requires 1-5/8" deep surface mount box.
Brand: Camden
Manufacturer Part Number: CM-336
Source: Camden Controls product page
| graphic | /40 hand icon, /41 hand icon+wave to open, /42 hand icon+wave to open+w, /43 hand icon+wave to lock, /44 hand icon+wheelchair |
|---|
Camden's SureWave touchless switches (CM-324, CM-325, and related CM-331/332/333/336 models) are hands-free door activation switches with adjustable operating range (1-30") and adjustable time delay (1-5 seconds), designed for economical door activation while reducing the spread of germs. CM-324 is line-powered with 1 relay for general use; CM-325 offers short-range sensing suited to confined areas such as restrooms.
| Operating voltage | 12-24 Volts, AC/DC ± 12% |
|---|---|
| Current draw | 50 – 60 mA |
| Response time | 100 ms |
| Contact rating | 5 Amps @ 30 VDC |
| Switch life | 100,000 Operations @ Rated Capacity; 500,000 Operations @ 1/2 Rated Capacity |
| Temperature | -4°F to +185°F (-20°C to +85°C) |
| Output type | Normal or Fail-Safe, Form 'C' (SPDT) |
| Time delay | 1 to 5 seconds |
| Low-voltage wiring | Connection count needs review |
| Preparation | For the base single-gang CM-336, use an in-wall box that is plumb, square and flush with the wall, or a surface box that is secure and plumb. The supplied sealing gasket is recommended for outdoor or wet locations. Set LED/sounder options, secure the unit and faceplate with the supplied screws without overtightening, and insert the two AA batteries into the pre-installed holder with correct polarity. Pair with the selected compatible Lazerpoint receiver and verify activation and range. The base single-gang model does not inherit narrow-variant box-depth requirements. |
| Electrical | CM-336 uses two AA batteries and its built-in 915 MHz transmitter for base activation. Pair it with a compatible CM-RX90 V2, CM-RX91 or CM-RX92 receiver; the receiver power and relay wiring are separate installation items. The rear view also labels an optional Request to Exit input. Confirm the remote-device electrical interface and terminal specification before connecting that option; battery operation does not prove that every optional configuration has no field wiring. LED and sounder enable settings affect battery consumption. |
| Preparation required | Yes |
Reviews
There are no reviews yet.