Camden CM-45/10 – N/O & N/C switch for CM-40, 41, 45, 60 series, rated 15 A @ 20 VDC

$50.00

N/O & N/C switch for CM-40, 41, 45, 60 series, rated 15 A @ 20 VDC

SKU: CM-45/10

Category: Actuators

Brands: Camden

Description

Series: Parts for Push Buttons

Configuration: Contact Blocks/Switches

N/O & N/C switch for CM-40, 41, 45, 60 series, rated 15 A @ 20 VDC

Brand: Camden

Manufacturer Part Number: CM-45/10

Source: Camden Controls product page

There are no reviews yet.

Be the first to review “Camden CM-45/10 – N/O & N/C switch for CM-40, 41, 45, 60 series, rated 15 A @ 20 VDC”

Product specifications
Low-voltage wiring	Required
Basis	Structured, independently qualified product connection evidence
Electrical	CM-45/10 is the N/O and N/C replacement switch listed for CM-40, CM-41, CM-45 and CM-60 series. The replacement-parts listing states a contact rating of 15 A at 20 VDC, while the CM-45 host manual states 15 A at 30 VDC. Confirm the delivered replacement rating before selecting a load; these are contact ratings, not a supply requirement. For the illustrated CM-45 host normally-open low-voltage controller circuit, use COM and NO; NC remains unused and COM connects to NO while pressed. Other contact selections require the actual controller design. Select field cable type, gauge, routing and physical run quantities for the actual host and controlled equipment.
Electrical wiring required	Yes
Conditional connections	CM-45/10 in CM-45 host: direct low-voltage normally-open controller input: cable runs quantity unspecified; 2 conductor(s); wire type not documented; size unspecified; shielding unspecified; rating Field cable type, gauge, shielding and physical run quantity unspecified.; endpoints Selected external low-voltage controller input to Switch COM and NO; when Installation configuration is Only the compatible CM-45 host with the illustrated normally-open low-voltage direct controller circuit; NC unused. Other hosts or NC/combined contact selections require their own design.