36\” x 4.5\” Column™ aluminum side load push plate switch, anodized clear finish with built-in Kinetic no-battery wireless transmitter, receiver required
Series: CM-74/75 & CM-84/85 Series
Type: Column™ Push Plate Switches
Configuration: 4.5" Wide
36" x 4.5" Column™ aluminum side load push plate switch, anodized clear finish with built-in Kinetic no-battery wireless transmitter, receiver required
Brand: Camden
Manufacturer Part Number: CM-8436K
Source: Camden Controls product page
| graphic | /1 no graphic, /2 wheelchair, /20 wheelchair+foot icon, /2AL wheelchair+arrow left, /2AR wheelchair+arrow right, /3 push to open, /4 wheelchair+push to open, /40 wheelchair+push to open, /4AL wheelchair+push to open, /4AR wheelchair+push to open, /80 lock (red)+foot icon, /8B lock+push to lock, /8C lock symbol, /A2 active wheelchair, /A20 active wheelchair+foot i, /A4 active wheelchair+push t, /A40 active wheelchair+push t |
|---|
Camden's CM-74 and CM-75 Series top-activation Column push plate switches are surface mounted and designed for installations with no obstruction above the unit, offering a discreet appearance. The CM-84 and CM-85 Series side-activation Column switches are two-piece units with a surface-mounted back box, designed for use when an overhead obstruction prevents a top-activation model, when mounting on a narrow curtain wall, or when the unit must pass through a glass panel.
| Contact rating standard models | 15 A @ 30VDC |
|---|---|
| Contact rating vr models | 1 A @ 30VDC |
| Voltage vr models | 12 to 24 VDC +/- 10% |
| Contact type standard | momentary contact switch, single pole double throw, Form C |
| Contact type vr | common/normally open/normally closed |
| Depth (CM-84/85) | 2-1/4" (32mm) |
| Width (CM-74) | 4-1/2" |
| Width (CM-75) | 6" |
| Width (CM-84) | 4-1/2" |
| Width (CM-85) | 6" |
| Low-voltage wiring | Not required |
| Preparation | The side load series (CM-84/85) is documented as surface mount with an integral back box, 2-1/4" (32mm) deep. The mounting surface must therefore be able to take a surface-mounted unit of that depth. The page does not say how the fasteners or the wall should be prepared. |
| Electrical | The CM-8436K has a built-in Kinetic no-battery wireless transmitter, so the base product needs no physical wired connection. The separately required receiver will need its own wiring, which is not covered by the supplied evidence and is not counted here. |
| Preparation required | Yes |
| Electrical wiring required | No |
Reviews
There are no reviews yet.