AutoDoor Experts

LCN 8310-862 – Handheld Transmitter, 2-Button, 433 MHz

$25.00

Model 8310-862. Installer-grade transmitter.

SKU: 8310-862

Category: Miscellaneous

Tags: automatic doors, installer-grade, LCN

Brands: LCN

Description

Wireless
2 Channel, Handheld, 3v.
Requires 8310-865 Receiver

Additional information

Brand	LCN

Reviews

There are no reviews yet.

Be the first to review “LCN 8310-862 – Handheld Transmitter, 2-Button, 433 MHz”

LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).

Product specifications
Touchless actuator supply (8310-813)	12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W)
900 MHz receiver input voltage (8310-880)	12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC
Wireless transmitter power consumption (900 MHz)	30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX)
Receiver capacity	up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode
Low-voltage wiring	Not required
Preparation	Before handheld use, remove the transmitter plastic pull-tab to connect its battery. At the separate receiver, select the desired activation cycle and Learn with Delay or Learn without Delay. If using delayed learning, first set the delay control to zero, complete learning, then adjust the required delay. Press the transmitter button until the receiver blue LED illuminates, then test transmitter and receiver indication and door operation with pedestrian traffic controlled. This is device setup; the manual does not provide a site-preparation yes/no statement for this handheld model.
Electrical	Battery-powered handheld transmitter. Remove the plastic pull-tab to connect the onboard battery before pairing. No low-voltage field cable is required for the handheld transmitter:zero cable runs;wire type not applicable. The separate receiver requires its own supply and control wiring. The shared instructions do not explicitly map a replacement battery type to this exact button-count model.
Electrical wiring required	No