Model 8310-853WP. Installer-grade surface mounted actuator.
Wireless, low profile, low voltage actuator with square, stainless steel touch
plate in 4-3/4˝ (121mm) square
Engraved blue filled handicap symbol conforms to most accessibility codes
Surface mount box includes integral transmitter w/ battery and actuator
switch
Heavy industrial grade components provide vandal resistant mounting and
weather resistant switch standard
Requires 8310-865 Receiver
| Brand | LCN |
|---|
LCN 8310 Series is a modular system of touchless and push-plate door actuators, wireless transmitter/receiver sets, mounting boxes, escutcheons, weather/trim rings, safety sensors, and accessory kits used to remotely actuate LCN automatic swing-door operators (e.g., 4630/4640, 7900 pneumatic auto-equalizer, 9100 Benchmark, Senior Swing 2800/9500, Mid Swing 2900/9700 series). Touchless actuators and hardwired push plates require a wired, low-voltage power/control connection back to the door operator control box; most are also compatible with a 433 MHz or 900 MHz wireless transmitter/receiver pair for wireless actuation signaling instead of a run of activation wire. A subset of push plates (8310-852WP/853WP) are fully wireless/battery powered with no field control wiring at the plate itself (only the receiver, sold separately, is wired to the operator).
| Touchless actuator supply (8310-813) | 12-24 VAC ±10% or 12-24 VDC +30%/-10%, SELV-compatible power supplies only; power consumption < 1.5W; output is a voltage-free relay (max 60VDC/125VAC, 1A resistive, 30W) |
|---|---|
| 900 MHz receiver input voltage (8310-880) | 12-24 VAC/VDC; relay contact rating 1.0A@30VDC, 0.3A@60VDC, 0.5A@125VAC |
| Wireless transmitter power consumption (900 MHz) | 30mA (standard TX) / 40mA (RX) / 22mA (retrofit TX) |
| Receiver capacity | up to 74-75 transmitters per standard receiver; unlimited for 'universal' mode |
| Low-voltage wiring | Connection count needs review |
| Preparation | Install the mounting bracket on the selected surface with at least two #8 countersunk-head screws, observing the bracket orientation. Slide the housing onto the mounting keys until the locking tab engages, then engage the faceplate spring clips. This wireless push-plate unit is surface mount only. |
| Electrical | The wireless push plate uses one 12V Type A23 battery. Program the separately sold receiver using the appropriate 433 MHz receiver instructions. Receiver power and activation wiring belong to that separate receiver, not to a universal field cable for the battery push plate. |
| Preparation required | Yes |
Reviews
There are no reviews yet.